- Rigid chassis
- WhichTractor size: Utility
- No lab test on file
- 2001–2005
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Deutz-Fahr Agroplus 80 Hydraulics & PTO specs
12 hydraulics and PTO values on record for the Agroplus 80.
Engine power, claimed · gross or net not stated
76.0 hp
56.7 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Deutz-Fahr Agroplus 80”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
What hydraulics does an Agroplus 80 have?
Hydraulic and hitch specifications for the Agroplus 80 are below.
| Hydraulic centre | Open centre |
|---|---|
| Pump flow | 12.7 gpm · 48.0 L/min |
| Steering pump flow | 7.9 gpm · 30.0 L/min |
| Hydraulic pressure | 2,031 psi · 140 bar |
| Rear remote valves | 3 |
| Three-point hitch category | Category 2 |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “Deutz-Fahr Agroplus 80”
What PTO does an Agroplus 80 have?
An Agroplus 80 has a 540 rpm / 1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540 rpm / 1000 rpm |
| Front PTO available, optional | Yes |
Source · Traktorenlexikon, “Deutz-Fahr Agroplus 80”
Sources and how this page was built
12 hydraulics and PTO values from Traktorenlexikon, “Deutz-Fahr Agroplus 80”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Deutz-Fahr Agroplus 80 — CC BY-SA 4.0, WIKIBOOKS-TL-89672 · revision 990360. Wikibooks contributors (Traktorenlexikon). Original document