- Rigid chassis
- WhichTractor size: Utility
- Lab tested ×1
- 1997–2005
WhichTractor size, not the maker’s category
Deutz-Fahr Agroplus 70 Hydraulics & PTO specifications
24 hydraulics and PTO values on record for the Agroplus 70.
Engine power, claimed · gross or net not stated
69.1 hp
51.5 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Deutz-Fahr Agroplus 70”, claimed
How much will an Agroplus 70 lift?
An Agroplus 70 lifts 6,393 lb (2,900 kg) at the lower-link ends.
| Hydraulic centre | Open centre |
|---|---|
| Pump flow | 11.8 gpm · 44.7 L/min |
| Steering pump flow | 7.9 gpm · 30.0 L/min |
| Hydraulic pressure | 2,031 psi · 140 bar |
| Rear remote valves | 4 |
| Three-point hitch category | Category 2 |
| Lift capacity at ball ends | 6,393 lb · 2,900 kg |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “Deutz-Fahr Agroplus 70”
What PTO does an Agroplus 70 have?
An Agroplus 70 has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Engine speed at 540 PTO | 2,077 rpm |
| Rear PTO shaft | 35 mm, 6 splinesSource 1 |
| Front PTO available, optional | Yes |
Source · Traktorenlexikon, “Deutz-Fahr Agroplus 70”
How much power does an Agroplus 70 deliver at the PTO?
On OECD Test 1686, the Agroplus 70 delivered 66.5 hp (49.6 kW) at the PTO shaft, at maximum power.
| PTO power, at maximum power | 66.5 hp · 49.6 kWAt 1,000 PTO rpmAt 2,300 engine rpm |
|---|---|
| PTO power, at rated engine speed | 66.5 hp · 49.6 kWAt 1,000 PTO rpmAt 2,300 engine rpm |
| PTO power, at standard PTO speed | 66.5 hp · 49.6 kWAt 1,000 PTO rpmAt 2,300 engine rpm |
| PTO shaft speed, at maximum power | 1,000 rpm |
| PTO shaft speed, at rated engine speed | 1,000 rpm |
| PTO shaft speed, at standard PTO speed | 1,000 rpm |
| Hydraulic power, at maximum power | 15.6 hp · 11.6 kW |
| Hydraulic pump delivery, at maximum power | 11.5 gpm · 43.5 L/min |
| Three-point lift force | 3,462 lbf · 15.4 kN |
Source · OECD test report 1686, 1997
Where this page comes from
24 hydraulics and PTO values from Traktorenlexikon, “Deutz-Fahr Agroplus 70”; and OECD test report 1686, 1997.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- OECD Code 2 test report 1 686: Deutz-Fahr Agroplus 70 — Licence not stated by the publisher; facts cited, OECD-1686 · published 1997-10-20 · retrieved 2026-09-14. OECD; testing station ISMA, Treviglio, Italy. Original document
- Traktorenlexikon: Deutz-Fahr Agroplus 70 — CC BY-SA 4.0, WIKIBOOKS-TL-15481 · revision 990357. Wikibooks contributors (Traktorenlexikon). Original document