- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 1985–1988
It sits on the standard-size/high-power boundary, so either size is a fair description. It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
DEUTZ-ALLIS 8070 Hydraulics & PTO specifications
11 hydraulics and PTO values on record for the 8070.
Engine power, claimed · gross or net not stated
169.6 hp
126.5 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Deutz-Allis 8070”, claimed
What hydraulics does an 8070 have?
Hydraulic and hitch specifications for the 8070 are below.
| Hydraulic centre | Closed centre |
|---|---|
| Pump flow | 22.0 gpm · 83.3 L/min |
| Steering pump flow | 9.5 gpm · 36.0 L/min |
| Hydraulic pressure | 3,771 psi · 260 bar |
| Rear remote valves | 1 |
| Three-point hitch category | Category 3 |
| Lift capacity 610 mm behind ends | 8,201 lb · 3,720 kg |
Source · Traktorenlexikon, “Deutz-Allis 8070”
What PTO does an 8070 have?
An 8070 has a 1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| Rear PTO speeds | 1000 rpm |
| Rear PTO shaft | 1 3/8"- 21 teilig |
Source · Traktorenlexikon, “Deutz-Allis 8070”
Where this page comes from
11 hydraulics and PTO values from Traktorenlexikon, “Deutz-Allis 8070”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Deutz-Allis 8070 — CC BY-SA 4.0, WIKIBOOKS-TL-122583 · revision 1084814. Wikibooks contributors (Traktorenlexikon). Original document