- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1994–2003
WhichTractor size, not the maker’s category
Case-Steyr M 9078 (a) Hydraulics & PTO specifications
8 hydraulics and PTO values on record for the M 9078 (a).
Engine power, claimed · gross or net not stated
77.0 hp
57.4 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Steyr M 9078”, claimed
How much will an M 9078 (a) lift?
An M 9078 (a) lifts 9,480 lb (4,300 kg) at the lower-link ends.
| Pump flow | 12.7 gpm · 48.1 L/min |
|---|---|
| Steering pump flow | 9.0 gpm · 34.0 L/min |
| Hydraulic pressure | 3,481 psi · 240 bar |
| Rear remote valves | 1 |
| Lift capacity at ball ends | 9,480 lb · 4,300 kg |
Source · Traktorenlexikon, “Steyr M 9078”
What PTO does an M 9078 (a) have?
An M 9078 (a) has a 430/540/1000 rpm rear PTO.
| Rear PTO speeds | 430/540/1000 rpm |
|---|---|
| Front PTO available, optional | Yes |
| PTO power, claimed | 70.3 hp · 52.4 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Steyr M 9078”
Where this page comes from
8 hydraulics and PTO values from Traktorenlexikon, “Steyr M 9078”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Steyr M 9078 — CC BY-SA 4.0, WIKIBOOKS-TL-108158 · revision 993749. Wikibooks contributors (Traktorenlexikon). Original document