- Rigid chassis
- WhichTractor size: Compact
- No lab test on file
- 1985–1990
WhichTractor size, not the maker’s category
CASE-INTERNATIONAL 485 (DT) Hydraulics & PTO specs
8 hydraulics and PTO values on record for the 485 (DT).
Engine power, claimed · gross or net not stated
51.2 hp
38.2 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Case-IH 485”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
How much will a 485 (DT) lift?
A 485 (DT) lifts 3,439 lb (1,560 kg) at the lower-link ends.
| Pump flow | 12.1 gpm · 45.7 L/min |
|---|---|
| Rear remote valves | 3 |
| Lift capacity at ball ends | 3,439 lb · 1,560 kg |
Source · Traktorenlexikon, “Case-IH 485”
What PTO does a 485 (DT) have?
A 485 (DT) has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Engine speed at 540 PTO | 1,936 rpm |
Source · Traktorenlexikon, “Case-IH 485”
Sources and how this page was built
8 hydraulics and PTO values from Traktorenlexikon, “Case-IH 485”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Case-IH 485 — CC BY-SA 4.0, WIKIBOOKS-TL-115466 · revision 974617. Wikibooks contributors (Traktorenlexikon). Original document