- Rigid chassis
- WhichTractor size: Utility
- Lab tested ×1
- 1998–2000
WhichTractor size, not the maker’s category
Case-IH MX 90 C Hydraulics & PTO specifications
23 hydraulics and PTO values on record for the MX 90 C.
Engine power, claimed · gross or net not stated
88.8 hp
66.2 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Case-IH MX90C”, claimed
What hydraulics does an MX 90 C have?
Hydraulic and hitch specifications for the MX 90 C are below.
| Hydraulic centre | Closed centreSource 1 |
|---|---|
| Pump flow | 23.4 gpm · 88.4 L/min |
| Hydraulic pressure | 3,408 psi · 235 bar |
| Rear remote valves | 3 |
| Three-point hitch category | Category 2 |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “Case-IH MX90C”
What PTO does an MX 90 C have?
An MX 90 C has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Engine speed at 540 PTO | 1,875 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines (Form-1) or 1 3/8"- 21 parts (Form-2) |
| Front PTO available, optional | Yes |
| PTO power, claimed | 75.4 hp · 56.2 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Case-IH MX90C”
How much power does an MX 90 C deliver at the PTO?
On OECD Test 1929, the MX 90 C delivered 75.5 hp (56.3 kW) at the PTO shaft, at maximum power.
| PTO power, at maximum power | 75.5 hp · 56.3 kWAt 950 PTO rpmAt 2,100 engine rpm |
|---|---|
| PTO power, at rated engine speed | 75.4 hp · 56.2 kWAt 996 PTO rpmAt 2,200 engine rpm |
| PTO power, at standard PTO speed | 75.4 hp · 56.2 kWAt 996 PTO rpmAt 2,200 engine rpm |
| PTO shaft speed, at maximum power | 950 rpm |
| PTO shaft speed, at rated engine speed | 996 rpm |
| PTO shaft speed, at standard PTO speed | 996 rpm |
| Hydraulic power, at maximum power | 26.6 hp · 19.8 kW |
| Hydraulic pump delivery, at maximum power | 20.9 gpm · 79.0 L/min |
| Three-point lift force | 8,925 lbf · 39.7 kN |
Source · OECD test report 1929, 2000
Where this page comes from
23 hydraulics and PTO values from OECD test report 1929, 2000; and Traktorenlexikon, “Case-IH MX90C”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- OECD Code 2 test report 2/1 929: Case IH MX 90C — Licence not stated by the publisher; facts cited, OECD-1929 · published 2000-11-03 · retrieved 2026-09-14. OECD; testing station DLG, Gross-Umstadt, Germany. Original document
- Traktorenlexikon: Case-IH MX90C — CC BY-SA 4.0, WIKIBOOKS-TL-91505 · revision 1023885. Wikibooks contributors (Traktorenlexikon). Original document