- Rigid chassis
- WhichTractor size: Utility
- Lab tested ×1
- 1998–2000
WhichTractor size, not the maker’s category
Case-IH MX 80C Hydraulics & PTO specs
22 hydraulics and PTO values on record for the MX 80 C.
Engine power, claimed · gross or net not stated
82.9 hp
61.8 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Case-IH MX80C”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
What hydraulics does an MX 80 C have?
Hydraulic and hitch specifications for the MX 80 C are below.
| Hydraulic centre | Closed centreSource 1 |
|---|---|
| Pump flow | 25.3 gpm · 95.6 L/min |
| Hydraulic pressure | 3,408 psi · 235 bar |
| Rear remote valves | 3 |
| Three-point hitch category | Category 2 |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “Case-IH MX80C”
What PTO does an MX 80 C have?
An MX 80 C has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Engine speed at 540 PTO | 1,875 rpm |
| Rear PTO shaft | 35 mm, 6 splines / 35 mm, 21 splinesSource 1 |
| Front PTO available, optional | Yes |
Source · Traktorenlexikon, “Case-IH MX80C”
How much power does an MX 80 C deliver at the PTO?
On OECD Test 1930, the MX 80 C delivered 67.9 hp (50.6 kW) at the PTO shaft, at maximum power.
| PTO power, at maximum power | 67.9 hp · 50.6 kWAt 950 PTO rpmAt 2,100 engine rpm |
|---|---|
| PTO power, at rated engine speed | 67.1 hp · 50.0 kWAt 996 PTO rpmAt 2,200 engine rpm |
| PTO power, at standard PTO speed | 67.1 hp · 50.0 kWAt 996 PTO rpmAt 2,200 engine rpm |
| PTO shaft speed, at maximum power | 950 rpm |
| PTO shaft speed, at rated engine speed | 996 rpm |
| PTO shaft speed, at standard PTO speed | 996 rpm |
| Hydraulic power, at maximum power | 30.3 hp · 22.6 kW |
| Hydraulic pump delivery, at maximum power | 23.9 gpm · 90.4 L/min |
| Three-point lift force | 9,622 lbf · 42.8 kN |
Source · OECD test report 1930, 2000
Sources and how this page was built
22 hydraulics and PTO values from OECD test report 1930, 2000; and Traktorenlexikon, “Case-IH MX80C”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- OECD Code 2 test report 2/1 930: Case IH MX 80C — Licence not stated by the publisher; facts cited, OECD-1930 · published 2000-11-07 · retrieved 2026-09-14. OECD; testing station DLG, Gross-Umstadt, Germany. Original document
- Traktorenlexikon: Case-IH MX80C — CC BY-SA 4.0, WIKIBOOKS-TL-115628 · revision 980172. Wikibooks contributors (Traktorenlexikon). Original document