- Rigid chassis
- WhichTractor size: High-power
- Lab tested ×1
- 2002–2005
WhichTractor size, not the maker’s category
Case-IH MX 285 Hydraulics & PTO specifications
21 hydraulics and PTO values on record for the MX 285.
Engine power, claimed · gross or net not stated
283.1 hp
211.1 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Case-IH MX285”, claimed
How much will an MX 285 lift?
An MX 285 lifts 19,872 lb (9,014 kg) at the lower-link ends.
| Hydraulic centre | Closed centreSource 1 |
|---|---|
| Pump flow | 43.0 gpm · 162.7 L/min |
| Hydraulic pressure | 3,024 psi · 208.5 bar |
| Rear remote valves | 4 |
| Three-point hitch category | Category 3 |
| Lift capacity at ball ends | 19,872 lb · 9,014 kg |
Source · Traktorenlexikon, “Case-IH MX285”
What PTO does an MX 285 have?
An MX 285 has a 1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 1000 rpm |
| Rear PTO shaft | 1 3/8"- 21 teilig |
| PTO power, claimed | 242.24 hp · 180.64 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Case-IH MX285”
How much power does an MX 285 deliver at the PTO?
On OECD Test 2190, the MX 285 delivered 276.1 hp (205.9 kW) at the PTO shaft, at maximum power.
| PTO power, at maximum power | 276.1 hp · 205.9 kWAt 853 PTO rpmAt 1,700 engine rpm |
|---|---|
| PTO power, at rated engine speed | 242.2 hp · 180.6 kWAt 1,003 PTO rpmAt 2,000 engine rpm |
| PTO power, at standard PTO speed | 242.2 hp · 180.6 kWAt 1,003 PTO rpmAt 2,000 engine rpm |
| PTO shaft speed, at maximum power | 853 rpm |
| PTO shaft speed, at rated engine speed | 1,003 rpm |
| PTO shaft speed, at standard PTO speed | 1,003 rpm |
| Hydraulic power, at maximum power | 64.0 hp · 47.7 kW |
| Hydraulic pump delivery, at maximum power | 38.5 gpm · 145.7 L/min |
| Three-point lift force | 21,739 lbf · 96.7 kN |
Source · OECD test report 2190, 2004
Where this page comes from
21 hydraulics and PTO values from OECD test report 2190, 2004; and Traktorenlexikon, “Case-IH MX285”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- OECD Code 2 test report 2/2 190: Case IH MX 285 — Licence not stated by the publisher; facts cited, OECD-2190 · published 2004-10-25 · retrieved 2026-09-14. OECD. Original document
- Traktorenlexikon: Case-IH MX285 — CC BY-SA 4.0, WIKIBOOKS-TL-90528 · revision 983930. Wikibooks contributors (Traktorenlexikon). Original document