- Rigid chassis
- WhichTractor size: Standard-size
- Lab tested ×1
- 2002–2005
WhichTractor size, not the maker’s category
Case-IH MX 210 Hydraulics & PTO specifications
22 hydraulics and PTO values on record for the MX 210.
Engine power, claimed · gross or net not stated
197.3 hp
147.1 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Case-IH MX210”, claimed
How much will an MX 210 lift?
An MX 210 lifts 16,749 lb (7,597 kg) at the lower-link ends.
| Hydraulic centre | Closed centreSource 1 |
|---|---|
| Pump flow | 38.6 gpm · 146.1 L/min |
| Hydraulic pressure | 3,024 psi · 208.5 bar |
| Rear remote valves | 3 |
| Three-point hitch category | Category 3 |
| Lift capacity at ball ends | 16,749 lb · 7,597 kg |
| Hitch control | lifting, lowering, lowering throttle, float position, position, draft and mixed control |
Source · Traktorenlexikon, “Case-IH MX210”
What PTO does an MX 210 have?
An MX 210 has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Engine speed at 540 PTO | 2,000 rpm |
| Rear PTO shaft | 44 mm, 20 splinesSource 1 |
Source · Traktorenlexikon, “Case-IH MX210”
How much power does an MX 210 deliver at the PTO?
On OECD Test 2184, the MX 210 delivered 198.1 hp (147.7 kW) at the PTO shaft, at maximum power.
| PTO power, at maximum power | 198.1 hp · 147.7 kWAt 851 PTO rpmAt 1,700 engine rpm |
|---|---|
| PTO power, at rated engine speed | 172.6 hp · 128.7 kWAt 1,003 PTO rpmAt 2,000 engine rpm |
| PTO power, at standard PTO speed | 172.6 hp · 128.7 kWAt 1,003 PTO rpmAt 2,000 engine rpm |
| PTO shaft speed, at maximum power | 851 rpm |
| PTO shaft speed, at rated engine speed | 1,003 rpm |
| PTO shaft speed, at standard PTO speed | 1,003 rpm |
| Hydraulic power, at maximum power | 62.0 hp · 46.2 kW |
| Hydraulic pump delivery, at maximum power | 38.6 gpm · 146.1 L/min |
| Three-point lift force | 19,109 lbf · 85.0 kN |
Source · OECD test report 2184, 2004
Where this page comes from
22 hydraulics and PTO values from OECD test report 2184, 2004; and Traktorenlexikon, “Case-IH MX210”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- OECD Code 2 test report 2/2 184: Case IH MX 210 — Licence not stated by the publisher; facts cited, OECD-2184 · published 2004-10-25 · retrieved 2026-09-14. OECD. Original document
- Traktorenlexikon: Case-IH MX210 — CC BY-SA 4.0, WIKIBOOKS-TL-90512 · revision 983900. Wikibooks contributors (Traktorenlexikon). Original document