- Rigid chassis
- WhichTractor size: Standard-size
- No lab test on file
- 1988–1993
WhichTractor size, not the maker’s category
Case-IH Magnum 7120 Hydraulics & PTO specs
13 hydraulics and PTO values on record for the Magnum 7120.
Engine power, claimed · gross or net not stated
177.6 hp
132.4 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Case-IH 7120”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
How much will a Magnum 7120 lift?
A Magnum 7120 lifts 14,661 lb (6,650 kg) at the lower-link ends.
| Pump flow | 28.5 gpm · 108.0 L/min |
|---|---|
| Hydraulic pressure | 2,625 psi · 181 bar |
| Rear remote valves | 3 |
| Three-point hitch category | Category 3 |
| Lift capacity at ball ends | 14,661 lb · 6,650 kg |
| Hitch control | Position, draft and mixed control |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “Case-IH 7120”
What PTO does a Magnum 7120 have?
A Magnum 7120 has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Engine speed at 540 PTO | 2,229 rpm |
| Front PTO available, optional | Yes |
Source · Traktorenlexikon, “Case-IH 7120”
Sources and how this page was built
13 hydraulics and PTO values from Traktorenlexikon, “Case-IH 7120”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Case-IH 7120 — CC BY-SA 4.0, WIKIBOOKS-TL-90508 · revision 976986. Wikibooks contributors (Traktorenlexikon). Original document