Case-IH JX1080U Hydraulics & PTO specifications

A JX1080U lifts 10,031 lb (4,550 kg) at the lower-link ends.

A JX1080U has a 540E/540/1000 rpm rear PTO.

On OECD Test 2280, the JX1080U delivered 72.1 hp (53.8 kW) at the PTO shaft, at maximum power.

23 hydraulics and PTO values on record for the JX1080U.

Measured at the PTO shaft

72.1 hp

Source · OECD Test 2280, measured

How much will a JX1080U lift?

A JX1080U lifts 10,031 lb (4,550 kg) at the lower-link ends.

Hydraulics & hitch — JX1080U Hydraulics & hitch
Hydraulic control	Load sensingOn record for 1 of 3 configurations
Pump flow	16.4 gpm · 62.2 L/minOn record for 1 of 3 configurations
Steering pump flow	7.9 gpm · 30.0 L/minOn record for 1 of 3 configurations
Hydraulic pressure	2,031 psi · 140 barOn record for 1 of 3 configurations
Lift capacity at ball ends	10,031 lb · 4,550 kgOn record for 1 of 3 configurations
Front hitch available, optional	YesOn record for 1 of 3 configurations

Source · Traktorenlexikon, “Case-IH JX1080U”

A JX1080U has a 540E/540/1000 rpm rear PTO.

PTO — JX1080U PTO
Rear PTO drive	Engine-drivenOn record for 1 of 3 configurations
Ground-speed PTO	YesOn record for 1 of 3 configurations
Rear PTO independence	IndependentOn record for 1 of 3 configurations
Rear PTO speeds	540E/540/1000 rpm
Engine speed at 540 PTO	2,199 rpmOn record for 1 of 3 configurations
Rear PTO shaft	35 mm, 6 splines / 35 mm, 21 splines^{Source 1}
Front PTO available, optional	YesOn record for 1 of 3 configurations
PTO power, claimed	71.1 hp · 53.0 kWOn record for 1 of 3 configurationsClaimed; standard not stated by the source

Source · Traktorenlexikon, “Case-IH JX1080U”

On OECD Test 2280, the JX1080U delivered 72.1 hp (53.8 kW) at the PTO shaft, at maximum power.

OECD Test 2280 — JX1080U as tested, configuration as printed: “4 WD · T2C6T1 - 12 speeds - 40 km/h”
PTO power, at maximum power	72.1 hp · 53.8 kWAt 1,008 PTO rpmAt 2,400 engine rpm
PTO power, at rated engine speed	71.6 hp · 53.4 kWAt 1,049 PTO rpmAt 2,498 engine rpm
PTO power, at standard PTO speed	72.1 hp · 53.8 kWAt 1,008 PTO rpmAt 2,400 engine rpm
PTO shaft speed, at maximum power	1,008 rpm
PTO shaft speed, at rated engine speed	1,049 rpm
PTO shaft speed, at standard PTO speed	1,008 rpm
Hydraulic power, at maximum power	20.8 hp · 15.5 kW
Hydraulic pump delivery, at maximum power	14.3 gpm · 54.3 L/min
Three-point lift force	7,216 lbf · 32.1 kN

Source · OECD test report 2280, 2005

23 hydraulics and PTO values from Traktorenlexikon, “Case-IH JX1080U”; and OECD test report 2280, 2005.

Last verified

Not yet verified

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

OECD Code 2 test report 1/2 280: Case IH JX1080U — Licence not stated by the publisher; facts cited, OECD-2280 · published 2005-10-14 · retrieved 2026-09-14. OECD; testing station IMAMOTER, Torino, Italy. Original document
Traktorenlexikon: Case-IH JX1080U — CC BY-SA 4.0, WIKIBOOKS-TL-115785 · revision 983483. Wikibooks contributors (Traktorenlexikon). Original document