Case-IH JX 1070 C Hydraulics & PTO specifications

A JX 1070 C lifts 5,362 lb (2,432 kg) at the lower-link ends.

A JX 1070 C has a 540E/540/1000E/1000 rpm rear PTO.

On OECD Test 2162, the JX 1070 C delivered 60.6 hp (45.2 kW) at the PTO shaft, at maximum power.

On OECD Test 2163, the JX 1070 C delivered 60.6 hp (45.2 kW) at the PTO shaft, at maximum power.

18 hydraulics and PTO values on record for the JX 1070 C.

Engine power, claimed · gross or net not stated

71 hp

53 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Case-IH JX1070C”, claimed

How much will a JX 1070 C lift?

A JX 1070 C lifts 5,362 lb (2,432 kg) at the lower-link ends.

Hydraulics & hitch — JX 1070 C Hydraulics & hitch
Pump flow	13.8 gpm · 52.3 L/min
Hydraulic pressure	2,466 psi · 170 bar
Lift capacity at ball ends	5,362 lb · 2,432 kg
Front hitch available, optional	Yes

Source · Traktorenlexikon, “Case-IH JX1070C”

A JX 1070 C has a 540E/540/1000E/1000 rpm rear PTO.

PTO — JX 1070 C PTO
Rear PTO speeds	540E/540/1000E/1000 rpm
Engine speed at 540 PTO	2,196 rpm
Rear PTO shaft	1 3/8"- 6 splines or 1 3/8"- 21 part
Front PTO available, optional	Yes
PTO power, claimed	60.2 hp · 44.9 kWClaimed; standard not stated by the source

Source · Traktorenlexikon, “Case-IH JX1070C”

On OECD Test 2162, the JX 1070 C delivered 60.6 hp (45.2 kW) at the PTO shaft, at maximum power.

OECD Test 2162 — JX 1070 C as tested, configuration as printed: “4 WD · H2C6 - 16 speeds - 40 km/h”
PTO power, at maximum power	60.6 hp · 45.2 kWAt 552 PTO rpmAt 2,248 engine rpm
PTO power, at rated engine speed	59.8 hp · 44.6 kWAt 565 PTO rpmAt 2,299 engine rpm
PTO power, at standard PTO speed	60.2 hp · 44.9 kWAt 543 PTO rpmAt 2,211 engine rpm
PTO shaft speed, at maximum power	552 rpm
PTO shaft speed, at rated engine speed	565 rpm
PTO shaft speed, at standard PTO speed	543 rpm
Hydraulic power, at maximum power	15.8 hp · 11.8 kW
Hydraulic pump delivery, at maximum power	9.6 gpm · 36.2 L/min
Three-point lift force	4,721 lbf · 21.0 kN

Source · OECD test report 2162, 2004

On OECD Test 2163, the JX 1070 C delivered 60.6 hp (45.2 kW) at the PTO shaft, at maximum power.

OECD Test 2163 — JX 1070 C as tested, configuration as printed: “2 WD · H2C2 - 16 speeds - 30 km/h”
PTO power, at maximum power	60.6 hp · 45.2 kWAt 552 PTO rpmAt 2,248 engine rpm
PTO power, at rated engine speed	59.8 hp · 44.6 kWAt 565 PTO rpmAt 2,299 engine rpm
PTO power, at standard PTO speed	60.2 hp · 44.9 kWAt 543 PTO rpmAt 2,211 engine rpm
PTO shaft speed, at maximum power	552 rpm
PTO shaft speed, at rated engine speed	565 rpm
PTO shaft speed, at standard PTO speed	543 rpm
Hydraulic power, at maximum power	15.8 hp · 11.8 kW
Hydraulic pump delivery, at maximum power	9.6 gpm · 36.2 L/min
Three-point lift force	4,721 lbf · 21.0 kN

Source · OECD test report 2163, 2004

18 hydraulics and PTO values from Traktorenlexikon, “Case-IH JX1070C”; OECD test report 2162, 2004; and OECD test report 2163, 2004.

Last verified

Not yet verified

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

OECD Code 2 test report 1/2 162: Case IH JX 1070 C — Licence not stated by the publisher; facts cited, OECD-2162 · published 2004-08-12 · retrieved 2026-09-14. OECD; testing station Università di Bologna, Bologna, Italy. Original document
OECD Code 2 test report 1/2 163: Case IH JX 1070 C — Licence not stated by the publisher; facts cited, OECD-2163 · published 2004-08-30 · retrieved 2026-09-14. OECD. Original document
Traktorenlexikon: Case-IH JX1070C — CC BY-SA 4.0, WIKIBOOKS-TL-115690 · revision 982392. Wikibooks contributors (Traktorenlexikon). Original document