- Rigid chassis
- WhichTractor size: Utility
- Lab tested ×1
- 1998–2000
WhichTractor size, not the maker’s category
Case-IH CX 70 Hydraulics & PTO specifications
23 hydraulics and PTO values on record for the CX 70.
Measured at the PTO shaft
62.1 hp
Source · OECD Test 1895, measured
How much will a CX 70 lift?
A CX 70 lifts 4,383 lb (1,988 kg) at the lower-link ends.
| Pump flow | 14.0 gpm · 53.0 L/minOn record for 1 of 2 configurations |
|---|---|
| Steering pump flow | 7.4 gpm · 28.0 L/minOn record for 1 of 2 configurations |
| Hydraulic pressure | 2,698 psi · 186 barOn record for 1 of 2 configurations |
| Rear remote valves | 3On record for 1 of 2 configurations |
| Lift capacity at ball ends | 4,383 lb · 1,988 kgOn record for 1 of 2 configurations |
| Front hitch available, optional | YesOn record for 1 of 2 configurations |
Source · Traktorenlexikon, “Case-IH CX70”
What PTO does a CX 70 have?
A CX 70 has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-drivenOn record for 1 of 2 configurations |
|---|---|
| Rear PTO independence | IndependentOn record for 1 of 2 configurations |
| PTO engages under load | YesOn record for 1 of 2 configurations |
| Rear PTO speeds | 540/1000 rpmSource 1 |
| Engine speed at 540 PTO | 1,994 rpmOn record for 1 of 2 configurations |
| Rear PTO shaft | 35 mm, 6 splinesSource 1 |
| Front PTO available, optional | YesOn record for 1 of 2 configurations |
| PTO power, claimed | 62.1 hp · 46.3 kWOn record for 1 of 2 configurationsClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Case-IH CX70”
How much power does a CX 70 deliver at the PTO?
On OECD Test 1895, the CX 70 delivered 62.1 hp (46.3 kW) at the PTO shaft, at maximum power.
| PTO power, at maximum power | 62.1 hp · 46.3 kWAt 1,000 PTO rpmAt 2,000 engine rpm |
|---|---|
| PTO power, at rated engine speed | 59.7 hp · 44.5 kWAt 1,100 PTO rpmAt 2,200 engine rpm |
| PTO power, at standard PTO speed | 62.1 hp · 46.3 kWAt 1,000 PTO rpmAt 2,000 engine rpm |
| PTO shaft speed, at maximum power | 1,000 rpm |
| PTO shaft speed, at rated engine speed | 1,100 rpm |
| PTO shaft speed, at standard PTO speed | 1,000 rpm |
| Hydraulic power, at maximum power | 19.3 hp · 14.4 kW |
| Hydraulic pump delivery, at maximum power | 14.4 gpm · 54.5 L/min |
| Three-point lift force | 3,462 lbf · 15.4 kN |
Source · OECD test report 1895, 2000
Where this page comes from
23 hydraulics and PTO values from Traktorenlexikon, “Case-IH CX70”; and OECD test report 1895, 2000.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- OECD Code 2 test report 2/1 895: Case IH CX 70 — Licence not stated by the publisher; facts cited, OECD-1895 · published 2000-03-22 · retrieved 2026-09-14. OECD; testing station DLG, Gross-Umstadt, Germany. Original document
- Traktorenlexikon: Case-IH CX70 — CC BY-SA 4.0, WIKIBOOKS-TL-115625 · revision 980152. Wikibooks contributors (Traktorenlexikon). Original document