- Rigid chassis
- WhichTractor size: Utility
- Lab tested ×1
- 1998–2000
WhichTractor size, not the maker’s category
Case-IH CX 60 Hydraulics & PTO specifications
22 hydraulics and PTO values on record for the CX 60.
Measured at the PTO shaft
56.5 hp
Source · OECD Test 1894, measured
How much will a CX 60 lift?
A CX 60 lifts 4,453 lb (2,020 kg) at the lower-link ends.
| Pump flow | 14.0 gpm · 53.0 L/minOn record for 1 of 2 configurations |
|---|---|
| Steering pump flow | 7.4 gpm · 28.0 L/minOn record for 1 of 2 configurations |
| Hydraulic pressure | 2,698 psi · 186 barOn record for 1 of 2 configurations |
| Lift capacity at ball ends | 4,453 lb · 2,020 kgOn record for 1 of 2 configurations |
| Front hitch available, optional | YesOn record for 1 of 2 configurations |
Source · Traktorenlexikon, “Case-IH CX60”
What PTO does a CX 60 have?
A CX 60 has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-drivenOn record for 1 of 2 configurations |
|---|---|
| Rear PTO independence | IndependentOn record for 1 of 2 configurations |
| PTO engages under load | YesOn record for 1 of 2 configurations |
| Rear PTO speeds | 540/1000 rpmSource 1 |
| Engine speed at 540 PTO | 2,006 rpmOn record for 1 of 2 configurations |
| Rear PTO shaft | 35 mm, 6 splinesSource 1 |
| Front PTO available, optional | YesOn record for 1 of 2 configurations |
| PTO power, claimed | 55.0 hp · 41.0 kWOn record for 1 of 2 configurationsClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Case-IH CX60”
How much power does a CX 60 deliver at the PTO?
On OECD Test 1894, the CX 60 delivered 56.5 hp (42.1 kW) at the PTO shaft, at maximum power.
| PTO power, at maximum power | 56.5 hp · 42.1 kWAt 592 PTO rpmAt 2,200 engine rpm |
|---|---|
| PTO power, at rated engine speed | 56.2 hp · 41.9 kWAt 606 PTO rpmAt 2,250 engine rpm |
| PTO power, at standard PTO speed | 55.0 hp · 41.0 kWAt 540 PTO rpmAt 2,006 engine rpm |
| PTO shaft speed, at maximum power | 592 rpm |
| PTO shaft speed, at rated engine speed | 606 rpm |
| PTO shaft speed, at standard PTO speed | 540 rpm |
| Hydraulic power, at maximum power | 15.8 hp · 11.8 kW |
| Hydraulic pump delivery, at maximum power | 11.5 gpm · 43.6 L/min |
| Three-point lift force | 3,440 lbf · 15.3 kN |
Source · OECD test report 1894, 2000
Where this page comes from
22 hydraulics and PTO values from Traktorenlexikon, “Case-IH CX60”; and OECD test report 1894, 2000.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- OECD Code 2 test report 2/1 894: Case IH CX 60 — Licence not stated by the publisher; facts cited, OECD-1894 · published 2000-03-21 · retrieved 2026-09-14. OECD; testing station DLG, Gross-Umstadt, Germany. Original document
- Traktorenlexikon: Case-IH CX60 — CC BY-SA 4.0, WIKIBOOKS-TL-115624 · revision 980131. Wikibooks contributors (Traktorenlexikon). Original document