Case-IH CX 50 Hydraulics & PTO specifications

A CX 50 lifts 4,451 lb (2,019 kg) at the lower-link ends.

A CX 50 has a 540/1000 rpm rear PTO.

On OECD Test 1893, the CX 50 delivered 42.5 hp (31.7 kW) at the PTO shaft, at maximum power.

19 hydraulics and PTO values on record for the CX 50.

Measured at the PTO shaft

42.5 hp

Source · OECD Test 1893, measured

How much will a CX 50 lift?

A CX 50 lifts 4,451 lb (2,019 kg) at the lower-link ends.

Hydraulics & hitch — CX 50 Hydraulics & hitch
Pump flow	14.0 gpm · 53.0 L/minOn record for 1 of 2 configurations
Steering pump flow	7.4 gpm · 28.0 L/minOn record for 1 of 2 configurations
Hydraulic pressure	2,698 psi · 186 barOn record for 1 of 2 configurations
Rear remote valves	3On record for 1 of 2 configurations
Lift capacity at ball ends	4,451 lb · 2,019 kgOn record for 1 of 2 configurations
Front hitch available, optional	YesOn record for 1 of 2 configurations

Source · Traktorenlexikon, “Case-IH CX50”

A CX 50 has a 540/1000 rpm rear PTO.

PTO — CX 50 PTO
Rear PTO speeds	540/1000 rpm
Rear PTO shaft	35 mm, 6 splines
Front PTO available, optional	Yes^{Source 2}On record for 1 of 2 configurations
PTO power, claimed	40.9 hp · 30.5 kW^{Source 2}On record for 1 of 2 configurationsClaimed; standard not stated by the source

Source · OECD test report 1893, 2000

On OECD Test 1893, the CX 50 delivered 42.5 hp (31.7 kW) at the PTO shaft, at maximum power.

OECD Test 1893 — CX 50 as tested, configuration as printed: “4 WD · CX 50 A - 30 km/h”
PTO power, at maximum power	42.5 hp · 31.7 kWAt 605 PTO rpmAt 2,248 engine rpm
PTO power, at rated engine speed	42.5 hp · 31.7 kWAt 605 PTO rpmAt 2,248 engine rpm
PTO power, at standard PTO speed	40.9 hp · 30.5 kWAt 540 PTO rpmAt 2,006 engine rpm
PTO shaft speed, at maximum power	605 rpm
PTO shaft speed, at rated engine speed	605 rpm
PTO shaft speed, at standard PTO speed	540 rpm
Hydraulic power, at maximum power	16.1 hp · 12.0 kW
Hydraulic pump delivery, at maximum power	12.6 gpm · 47.8 L/min
Three-point lift force	3,552 lbf · 15.8 kN

Source · OECD test report 1893, 2000

19 hydraulics and PTO values from Traktorenlexikon, “Case-IH CX50”; and OECD test report 1893, 2000.

Last verified

Not yet verified

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

OECD Code 2 test report 2/1 893: Case IH CX 50 — Licence not stated by the publisher; facts cited, OECD-1893 · published 2000-03-21 · retrieved 2026-09-14. OECD; testing station DLG, Gross-Umstadt, Germany. Original document
Traktorenlexikon: Case-IH CX50 — CC BY-SA 4.0, WIKIBOOKS-TL-115606 · revision 978957. Wikibooks contributors (Traktorenlexikon). Original document