- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 1997–1999
WhichTractor size, not the maker’s category
Case-IH 7210 PRO/8910 Hydraulics & PTO specifications
14 hydraulics and PTO values on record for the 7210 PRO/8910.
Engine power, claimed · gross or net not stated
168 hp
125 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Case-IH 7210 PRO/8910”, claimed
How much will a 7210 PRO/8910 lift?
A 7210 PRO/8910 lifts 11,960 lb (5,425 kg) at the lower-link ends.
| Pump flow | 29.8 gpm · 112.8 L/min |
|---|---|
| Hydraulic pressure | 2,451 psi · 169 bar |
| Rear remote valves | 3 |
| Three-point hitch category | Category 3 |
| Lift capacity at ball ends | 11,960 lb · 5,425 kg |
| Hitch control | Position, draft and mixed control |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “Case-IH 7210 PRO/8910”
What PTO does a 7210 PRO/8910 have?
A 7210 PRO/8910 has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Engine speed at 540 PTO | 2,171 rpm |
| Front PTO available, optional | Yes |
| PTO power, claimed | 137.5 hp · 102.5 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Case-IH 7210 PRO/8910”
Where this page comes from
14 hydraulics and PTO values from Traktorenlexikon, “Case-IH 7210 PRO/8910”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Case-IH 7210 PRO/8910 — CC BY-SA 4.0, WIKIBOOKS-TL-90506 · revision 1055206. Wikibooks contributors (Traktorenlexikon). Original document