- Rigid chassis
- WhichTractor size: High-power
- No lab test on file
- 1988–1993
It sits on the standard-size/high-power boundary, so either size is a fair description. WhichTractor size, not the maker’s category
Case-IH 7130 Magnum Hydraulics & PTO specs
13 hydraulics and PTO values on record for the 7130 Magnum.
Engine power, claimed · gross or net not stated
202.2 hp
150.8 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Case-IH 7130”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
How much will a 7130 Magnum lift?
A 7130 Magnum lifts 12,141 lb (5,507 kg) at the lower-link ends.
| Pump flow | 28.6 gpm · 108.1 L/min |
|---|---|
| Hydraulic pressure | 2,654 psi · 183 bar |
| Rear remote valves | 3 |
| Three-point hitch category | Category 3 |
| Lift capacity at ball ends | 12,141 lb · 5,507 kg |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “Case-IH 7130”
What PTO does a 7130 Magnum have?
A 7130 Magnum has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Engine speed at 540 PTO | 2,229 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines or 1 3/8"- 21 spline |
| Front PTO available, optional | Yes |
Source · Traktorenlexikon, “Case-IH 7130”
Sources and how this page was built
13 hydraulics and PTO values from Traktorenlexikon, “Case-IH 7130”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Case-IH 7130 — CC BY-SA 4.0, WIKIBOOKS-TL-90515 · revision 977069. Wikibooks contributors (Traktorenlexikon). Original document