- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 1975–1978
- 288 built
WhichTractor size, not the maker’s category
Bührer Komfort 465 (A) Hydraulics & PTO specifications
13 hydraulics and PTO values on record for the Komfort 465 (A).
Engine power, claimed · gross or net not stated
64.1 hp
47.8 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Bührer 465/465A”, claimed
How much will a Komfort 465 (A) lift?
A Komfort 465 (A) lifts 4,905 lb (2,225 kg) at the lower-link ends.
| Pump flow | 5.8 gpm · 22.0 L/min |
|---|---|
| Hydraulic pressure | 2,845 psi · 196 bar |
| Three-point hitch category | Category 2 |
| Lift capacity at ball ends | 4,905 lb · 2,225 kg |
| Hitch control | Lifting, lowering, position and draft control |
Source · Traktorenlexikon, “Bührer 465/465A”
What PTO does a Komfort 465 (A) have?
A Komfort 465 (A) has a 540 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Ground-speed PTO | Yes |
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540 rpm |
| Engine speed at 540 PTO | 1,895 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines |
| PTO power, claimed | 59.3 hp · 44.2 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Bührer 465/465A”
Where this page comes from
13 hydraulics and PTO values from Traktorenlexikon, “Bührer 465/465A”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Bührer 465/465A — CC BY-SA 4.0, WIKIBOOKS-TL-91464 · revision 1042462. Wikibooks contributors (Traktorenlexikon). Original document