- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 1952–1959
It sits on the utility/standard-size boundary, so either size is a fair description. It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
BOLINDER-MUNKTELL BM-24/BM-25 Hydraulics & PTO specifications
7 hydraulics and PTO values on record for the BM-24/BM-25.
Engine power, claimed · gross or net not stated
27.6 hp
20.6 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Bolinder-Munktell BM 24/25”, claimed
What hydraulics does a BM-24/BM-25 have?
Hydraulic and hitch specifications for the BM-24/BM-25 are below.
| Pump flow | 6.3 gpm · 23.8 L/min |
|---|---|
| Hydraulic pressure | 1,276 psi · 88 bar |
| Lift capacity (point not stated) | 1,279 lb · 580 kg |
Source · Traktorenlexikon, “Bolinder-Munktell BM 24/25”
What PTO does a BM-24/BM-25 have?
A BM-24/BM-25 has a 540 rpm rear PTO.
| Rear PTO drive | Transmission-driven |
|---|---|
| Rear PTO speeds | 540 rpm |
| Engine speed at 540 PTO | 1,700 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines |
Source · Traktorenlexikon, “Bolinder-Munktell BM 24/25”
Where this page comes from
7 hydraulics and PTO values from Traktorenlexikon, “Bolinder-Munktell BM 24/25”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Bolinder-Munktell BM 24/25 — CC BY-SA 4.0, WIKIBOOKS-TL-116151 · revision 994501. Wikibooks contributors (Traktorenlexikon). Original document