- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 2002–2004
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Agco RT-95 Hydraulics & PTO specifications
10 hydraulics and PTO values on record for the RT-95.
Engine power, claimed · gross or net not stated
95.6 hp
71.3 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “AGCO RT 95”, claimed
How much will a RT-95 lift?
A RT-95 lifts 7,361 lb (3,339 kg) at the lower-link ends.
| Hydraulic centre | Open centre |
|---|---|
| Pump flow | 29.4 gpm · 111.3 L/min |
| Hydraulic pressure | 3,336 psi · 230 bar |
| Rear remote valves | 2 |
| Lift capacity at ball ends | 7,361 lb · 3,339 kg |
Source · Traktorenlexikon, “AGCO RT 95”
What PTO does a RT-95 have?
A RT-95 has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Engine speed at 540 PTO | 1,976 rpm |
Source · Traktorenlexikon, “AGCO RT 95”
Where this page comes from
10 hydraulics and PTO values from Traktorenlexikon, “AGCO RT 95”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: AGCO RT 95 — CC BY-SA 4.0, WIKIBOOKS-TL-122916 · revision 1088443. Wikibooks contributors (Traktorenlexikon). Original document