- Rigid chassis
- WhichTractor size: Standard-size
- No lab test on file
- 2004–2005
It sits on the utility/standard-size boundary, so either size is a fair description. It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Agco RT-135 Hydraulics & PTO specs
14 hydraulics and PTO values on record for the RT-135.
Engine power, claimed · gross or net not stated
133.2 hp
99.3 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “AGCO RT 135”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
What hydraulics does a RT-135 have?
Hydraulic and hitch specifications for the RT-135 are below.
| Hydraulic centre | Closed centre |
|---|---|
| Hydraulic control | Load sensing |
| Pump flow | 30.6 gpm · 115.8 L/min |
| Steering pump flow | 9.4 gpm · 35.4 L/min |
| Hydraulic pressure | 3,336 psi · 230 bar |
| Rear remote valves | 4 |
| Hitch control | Lifting, lowering, float position and position, mixed and draft control |
Source · Traktorenlexikon, “AGCO RT 135”
What PTO does a RT-135 have?
A RT-135 has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Engine speed at 540 PTO | 2,062 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines or 1 3/8"- 21 part |
| Front PTO available, optional | Yes |
Source · Traktorenlexikon, “AGCO RT 135”
Sources and how this page was built
14 hydraulics and PTO values from Traktorenlexikon, “AGCO RT 135”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: AGCO RT 135 — CC BY-SA 4.0, WIKIBOOKS-TL-122928 · revision 1088618. Wikibooks contributors (Traktorenlexikon). Original document