- Vehicle type: unspecified
- Rigid chassis
- WhichTractor size: Utility
- No lab test on file
- 2008–2010
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Agco LT-95A Hydraulics & PTO specs
9 hydraulics and PTO values on record for the LT-95 A.
Engine power, claimed · gross or net not stated
113.5 hp
84.6 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “AGCO LT 95 A”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
What hydraulics does a LT-95 A have?
Hydraulic and hitch specifications for the LT-95 A are below.
| Hydraulic centre | Open centre |
|---|---|
| Pump flow | 14.5 gpm · 54.9 L/min |
| Hydraulic pressure | 3,046 psi · 210 bar |
Source · Traktorenlexikon, “AGCO LT 95 A”
What PTO does a LT-95 A have?
A LT-95 A has a 540 rpm / 1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540 rpm / 1000 rpm |
| Engine speed at 540 PTO | 1,980 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines or 1 3/4- 20 part |
Source · Traktorenlexikon, “AGCO LT 95 A”
Sources and how this page was built
9 hydraulics and PTO values from Traktorenlexikon, “AGCO LT 95 A”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: AGCO LT 95 A — CC BY-SA 4.0, WIKIBOOKS-TL-122960 · revision 1089015. Wikibooks contributors (Traktorenlexikon). Original document