- Rigid chassis
- WhichTractor size: Compact
- Not independently tested
- 2004–2007
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Agco GT-65 Hydraulics & PTO specifications
12 hydraulics and PTO values on record for the GT-65.
Engine power, claimed · gross or net not stated
70.0 hp
52.2 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “AGCO GT 65”, claimed
What hydraulics does a GT-65 have?
Hydraulic and hitch specifications for the GT-65 are below.
| Pump flow | 14.0 gpm · 53.0 L/min |
|---|---|
| Steering pump flow | 4.6 gpm · 17.5 L/min |
| Hydraulic pressure | 3,118 psi · 215 bar |
| Rear remote valves | 3 |
| Three-point hitch category | Category 2 |
| Lift capacity 610 mm behind ends | 3,521 lb · 1,597 kg |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “AGCO GT 65”
What PTO does a GT-65 have?
A GT-65 has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Front PTO available, optional | Yes |
Source · Traktorenlexikon, “AGCO GT 65”
Where this page comes from
12 hydraulics and PTO values from Traktorenlexikon, “AGCO GT 65”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: AGCO GT 65 — CC BY-SA 4.0, WIKIBOOKS-TL-122955 · revision 1089001. Wikibooks contributors (Traktorenlexikon). Original document