- Rigid chassis
- WhichTractor size: High-power
- No lab test on file
- 1994–1995
It sits on the standard-size/high-power boundary, so either size is a fair description. It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
AGCO-ALLIS 9690 Hydraulics & PTO specs
10 hydraulics and PTO values on record for the 9690.
Engine power, claimed · gross or net not stated
195.3 hp
145.6 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “AGCO-Allis 9690”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
How much will a 9690 lift?
A 9690 lifts 8,173 lb (3,707 kg) at the lower-link ends.
| Hydraulic centre | Closed centre |
|---|---|
| Pump flow | 21.8 gpm · 82.5 L/min |
| Hydraulic pressure | 2,944 psi · 203 bar |
| Rear remote valves | 3 |
| Lift capacity at ball ends | 8,173 lb · 3,707 kg |
| Lift capacity 610 mm behind ends | 9,901 lb · 4,491 kg |
Source · Traktorenlexikon, “AGCO-Allis 9690”
What PTO does a 9690 have?
A 9690 has a 1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| Rear PTO speeds | 1000 rpm |
| Rear PTO shaft | 1 3/4"- 20 teilig |
Source · Traktorenlexikon, “AGCO-Allis 9690”
Sources and how this page was built
10 hydraulics and PTO values from Traktorenlexikon, “AGCO-Allis 9690”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: AGCO-Allis 9690 — CC BY-SA 4.0, WIKIBOOKS-TL-122872 · revision 1087590. Wikibooks contributors (Traktorenlexikon). Original document