- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 1998–1999
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
AGCO-ALLIS 8785 Hydraulics & PTO specifications
10 hydraulics and PTO values on record for the 8785.
Engine power, claimed · gross or net not stated
110.5 hp
82.4 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “AGCO-Allis 8785”, claimed
How much will an 8785 lift?
An 8785 lifts 9,414 lb (4,270 kg) at the lower-link ends.
| Hydraulic centre | Open centre |
|---|---|
| Pump flow | 28.8 gpm · 109.0 L/min |
| Hydraulic pressure | 3,046 psi · 210 bar |
| Lift capacity at ball ends | 9,414 lb · 4,270 kg |
| Lift capacity 610 mm behind ends | 8,999 lb · 4,082 kg |
Source · Traktorenlexikon, “AGCO-Allis 8785”
What PTO does an 8785 have?
An 8785 has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines or 1 3/4- 20 parts |
Source · Traktorenlexikon, “AGCO-Allis 8785”
Where this page comes from
10 hydraulics and PTO values from Traktorenlexikon, “AGCO-Allis 8785”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: AGCO-Allis 8785 — CC BY-SA 4.0, WIKIBOOKS-TL-122801 · revision 1086992. Wikibooks contributors (Traktorenlexikon). Original document