- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 1991–1997
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
AGCO-ALLIS 8610 Hydraulics & PTO specifications
12 hydraulics and PTO values on record for the 8610.
Engine power, claimed · gross or net not stated
108.5 hp
80.9 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “AGCO-Allis 8610”, claimed
How much will an 8610 lift?
An 8610 lifts 10,441 lb (4,736 kg) at the lower-link ends.
| Hydraulic centre | Open centre |
|---|---|
| Pump flow | 16.3 gpm · 61.7 L/min |
| Hydraulic pressure | 2,176 psi · 150 bar |
| Rear remote valves | 2 |
| Three-point hitch category | Category 2 |
| Lift capacity at ball ends | 10,441 lb · 4,736 kg |
Source · Traktorenlexikon, “AGCO-Allis 8610”
What PTO does an 8610 have?
An 8610 has a 540/540E/1000E/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/540E/1000E/1000 rpm |
| Engine speed at 540 PTO | 2,229 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines and 1 3/8"- 21 parts |
Source · Traktorenlexikon, “AGCO-Allis 8610”
Where this page comes from
12 hydraulics and PTO values from Traktorenlexikon, “AGCO-Allis 8610”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: AGCO-Allis 8610 — CC BY-SA 4.0, WIKIBOOKS-TL-122747 · revision 1086667. Wikibooks contributors (Traktorenlexikon). Original document