- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 1991–1992
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
AGCO-ALLIS 7630 Hydraulics & PTO specifications
12 hydraulics and PTO values on record for the 7630.
Engine power, claimed · gross or net not stated
122.3 hp
91.2 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “AGCO-Allis 7630”, claimed
How much will a 7630 lift?
A 7630 lifts 11,905 lb (5,400 kg) at the lower-link ends.
| Hydraulic centre | Open centre |
|---|---|
| Pump flow | 16.9 gpm · 64.0 L/min |
| Steering pump flow | 8.2 gpm · 31.2 L/min |
| Hydraulic pressure | 3,046 psi · 210 bar |
| Rear remote valves | 2 |
| Lift capacity at ball ends | 11,905 lb · 5,400 kg |
Source · Traktorenlexikon, “AGCO-Allis 7630”
What PTO does a 7630 have?
A 7630 has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Engine speed at 540 PTO | 2,038 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines and 1 3/8"- 21 parts |
Source · Traktorenlexikon, “AGCO-Allis 7630”
Where this page comes from
12 hydraulics and PTO values from Traktorenlexikon, “AGCO-Allis 7630”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: AGCO-Allis 7630 — CC BY-SA 4.0, WIKIBOOKS-TL-122655 · revision 1086602. Wikibooks contributors (Traktorenlexikon). Original document