- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1994–1999
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
AGCO-ALLIS 5660 Hydraulics & PTO specifications
12 hydraulics and PTO values on record for the 5660.
Engine power, claimed · gross or net not stated
57.3 hp
42.7 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “AGCO-Allis 5660”, claimed
What hydraulics does a 5660 have?
Hydraulic and hitch specifications for the 5660 are below.
| Hydraulic centre | Open centre |
|---|---|
| Pump flow | 9.5 gpm · 36.0 L/min |
| Hydraulic pressure | 1,305 psi · 90 bar |
| Rear remote valves | 1 |
| Three-point hitch category | Category 2 |
| Lift capacity 610 mm behind ends | 4,530 lb · 2,055 kg |
| Hitch control | Lifting, lowering, position, response and draft control |
Source · Traktorenlexikon, “AGCO-Allis 5660”
What PTO does a 5660 have?
A 5660 has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Engine speed at 540 PTO | 2,044 rpm |
Source · Traktorenlexikon, “AGCO-Allis 5660”
Where this page comes from
12 hydraulics and PTO values from Traktorenlexikon, “AGCO-Allis 5660”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: AGCO-Allis 5660 — CC BY-SA 4.0, WIKIBOOKS-TL-122630 · revision 1085804. Wikibooks contributors (Traktorenlexikon). Original document