VALMET 8450 HiTech vs WHITE 140

10 material differences · fewer than 12

Tractor one

1998–2003

No measured PTO figure

Tractor two

1987–1990

No measured PTO figure

Which should you choose?

Read our verdict on the 8450 HiTech and the 140 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 3 fields identical or within 5%, which is not counted as material

VALMET 8450 HiTech and WHITE 140, field by field
Field	8450 HiTech	140	Gap
Engine
Engine power, claimed claimed	138 hp	138 hp	—
Engine declared	VALMET 620 DWRE	CUMMINS BTA 6-590	differs
Displacement declared	6.59 L	5.89 L	+12% 8450 HiTech
Maximum torque declared	454 lb·ft · 615 N·m	—	—
Transmission
Top speed declared	24.9–31.1 mph · 40–50 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Pedal-operated, dry FICHTEL & SACHS single-plate clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	19.4 gpm · 73.6 L/min	—	—
Pressure declared	3,046 psi · 210 bar	—	—
Three-point lift at ends declared	15,212 lb · 6,900 kg	7,335 lb · 3,327 kg	+107% 8450 HiTech
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	11,707 lb · 5,310 kg	12,401 lb · 5,625 kg	+6% 140
Maximum permissible mass declared	18,739 lb · 8,500 kg	—	—
Wheelbase declared	100.7 in · 2,558 mm	111.5 in · 2,832 mm	+11% 140
Length declared	194.4 in · 4,937 mm	175.0 in · 4,445 mm	+11% 8450 HiTech
Width declared	92.7 in · 2,355 mm	96.0 in · 2,438 mm	—
Height declared	109.8 in · 2,790 mm	119.0 in · 3,023 mm	+8% 140
Ground clearance declared	20.3 in · 515 mm	27.2 in · 692 mm	+34% 140
Turning radius, braked declared	—	12.6 ft · 3.84 m	—
Fuel tank declared	174.4 qt · 165.0 L	100.4–132.1 qt · 95.0–125.0 L	differs

Source

Source