VALMET 8050 vs ZETOR 11441

9 material differences · fewer than 12

Tractor one

1995–2004

No measured PTO figure

Tractor two

2002–2007

No measured PTO figure

Which should you choose?

Read our verdict on the 8050 and the 11441 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 8 fields identical or within 5%, which is not counted as material

VALMET 8050 and ZETOR 11441, field by field
Field	8050	11441	Gap
Engine
Engine power, claimed claimed	108.5 hp	108.5 hp	—
Engine declared	VALMET 620 DSR or 620 DSRE	Zetor Z-1403	differs
Displacement declared	6.59 L	4.16 L	+59% 8050
Maximum torque declared	340 lb·ft · 461 N·m	319 lb·ft · 432 N·m	+7% 8050
Transmission
Top speed declared	18.6–31.1 mph · 30–50 km/h	24.9 mph · 40 km/h	differs
Clutch declared	Pedal-operated dry Fichtel & Sachs single-disc clutch	Pedal-operated dry ZETOR single-disc clutch	differs
Hydraulics & hitch
Pump flow declared	18.8 gpm · 71.0 L/min	17.8 gpm · 67.5 L/min	—
Pressure declared	—	3,046 psi · 210 bar	—
Three-point lift at ends declared	14,110 lb · 6,400 kg	12,747 lb · 5,782 kg	+11% 8050
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	10,450 lb · 4,740 kg	10,505 lb · 4,765 kg	—
Maximum permissible mass declared	16,535 lb · 7,500 kg	17,196 lb · 7,800 kg	—
Wheelbase declared	100.7 in · 2,558 mm	94.4 in · 2,397 mm	+7% 8050
Length declared	187.3 in · 4,757 mm	198.7 in · 5,047 mm	+6% 11441
Width declared	84.8 in · 2,155 mm	85.2 in · 2,164 mm	—
Height declared	108.3 in · 2,750 mm	107.0 in · 2,717 mm	—
Ground clearance declared	18.7 in · 475 mm	17.9 in · 455 mm	—
Fuel tank declared	174.4 qt · 165.0 L	190.2 qt · 180.0 L	+9% 11441

Source

Source