VALMET 6550 HiTech vs ZETOR 10111/10145

8 material differences · fewer than 12

Tractor one

1998–2006

No measured PTO figure

Tractor two

1984–1990

No measured PTO figure

Which should you choose?

Read our verdict on the 6550 HiTech and the 10111/10145 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 6 fields identical or within 5%, which is not counted as material

VALMET 6550 HiTech and ZETOR 10111/10145, field by field
Field	6550 HiTech	10111/10145	Gap
Engine
Engine power, claimed claimed	98.6 hp	98.6 hp	—
Engine declared	VALMET 420 DWRE or 44 ET	ZETOR Z-8002.1	differs
Displacement declared	4.40 L	4.56 L	—
Maximum torque declared	—	227 lb·ft · 308 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Electrically-operated dry single-disc clutch	Pedal-operated dry ZTS single-disc clutch	differs
Hydraulics & hitch
Pump flow declared	18.7 gpm · 70.8 L/min	12.2 gpm · 46.2 L/min	+53% 6550 HiTech
Pressure declared	—	2,828 psi · 195 bar	—
Three-point lift at ends declared	12,346 lb · 5,600 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	10,406 lb · 4,720 kg	9,414 lb · 4,270 kg	+11% 6550 HiTech
Maximum permissible mass declared	16,535 lb · 7,500 kg	—	—
Wheelbase declared	92.1 in · 2,340 mm	93.9 in · 2,385 mm	—
Length declared	178.0 in · 4,520 mm	163.0 in · 4,140 mm	+9% 6550 HiTech
Width declared	92.9 in · 2,360 mm	76.4 in · 1,940 mm	+22% 6550 HiTech
Height declared	107.1 in · 2,720 mm	104.5 in · 2,655 mm	—
Ground clearance declared	17.1 in · 434 mm	11.8 in · 300 mm	+45% 6550 HiTech
Turning radius, braked declared	—	11.9 ft · 3.63 m	—
Fuel tank declared	174.4 qt · 165.0 L	132.1 qt · 125.0 L	+32% 6550 HiTech

Source

Source