VALMET 6300-4 vs ZETOR 9520/9540

10 material differences · fewer than 12

Tractor one

1991–2007

No measured PTO figure

Tractor two

1992–1999

No measured PTO figure

Which should you choose?

Read our verdict on the 6300-4 and the 9520/9540 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

VALMET 6300-4 and ZETOR 9520/9540, field by field
Field	6300-4	9520/9540	Gap
Engine
Engine power, claimed claimed	83.8 hp	92.7 hp	+11% 9520/9540
Engine declared	VALMET 420 DS/420 DSRE/44 DT	ZBROJOVKA Z-1001	differs
Displacement declared	4.40 L	4.16 L	+6% 6300-4
Maximum torque declared	—	275 lb·ft · 373 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Pedal-operated dry single-disc clutch	—
Hydraulics & hitch
Pump flow declared	18.4 gpm · 69.5 L/min	11.3 gpm · 42.9 L/min	+62% 6300-4
Pressure declared	—	3,046 psi · 210 bar	—
Three-point lift at ends declared	9,601 lb · 4,355 kg	10,207 lb · 4,630 kg	+6% 9520/9540
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,973 lb · 4,070 kg	8,157 lb · 3,700 kg	+10% 6300-4
Maximum permissible mass declared	14,330 lb · 6,500 kg	16,535 lb · 7,500 kg	+15% 9520/9540
Wheelbase declared	91.7 in · 2,330 mm	93.5 in · 2,375 mm	—
Length declared	174.2 in · 4,425 mm	165.0 in · 4,190 mm	+6% 6300-4
Width declared	79.1 in · 2,010 mm	76.8 in · 1,950 mm	—
Height declared	106.9 in · 2,715 mm	104.1 in · 2,645 mm	—
Ground clearance declared	17.1 in · 435 mm	13.9 in · 352 mm	+24% 6300-4
Turning radius, braked declared	15.3 ft · 4.65 m	12.2 ft · 3.73 m	+25% 6300-4
Fuel tank declared	167.0 qt · 158.0 L	111.0 qt · 105.0 L	+50% 6300-4

Source

Source