VALMET 6300-4 vs VALMET 705/705-4
8 material differences · fewer than 12
Which should you choose?
Read our verdict on the 6300-4 and the 705/705-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 6300-4 | 705/705-4 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 83.8 hp | 82 hp | — |
| Engine declared | VALMET 420 DS/420 DSRE/44 DT | VALMET TD 44 DS 7 | differs |
| Displacement declared | 4.40 L | 4.40 L | — |
| Maximum torque declared | — | 235 lb·ft · 318 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | — | Pedal-operated, dry LuK single-disc clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 18.4 gpm · 69.5 L/min | 12.7 gpm · 48.0 L/min | +45% 6300-4 |
| Pressure declared | — | 3,191 psi · 220 bar | — |
| Three-point lift at ends declared | 9,601 lb · 4,355 kg | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 8,973 lb · 4,070 kg | 8,356 lb · 3,790 kg | +7% 6300-4 |
| Maximum permissible mass declared | 14,330 lb · 6,500 kg | — | — |
| Wheelbase declared | 91.7 in · 2,330 mm | 93.9 in · 2,385 mm | — |
| Length declared | 174.2 in · 4,425 mm | 177.8 in · 4,515 mm | — |
| Width declared | 79.1 in · 2,010 mm | 83.9 in · 2,130 mm | +6% 705/705-4 |
| Height declared | 106.9 in · 2,715 mm | 105.1 in · 2,670 mm | — |
| Ground clearance declared | 17.1 in · 435 mm | 18.8 in · 478 mm | +10% 705/705-4 |
| Turning radius, braked declared | 15.3 ft · 4.65 m | — | — |
| Fuel tank declared | 167.0 qt · 158.0 L | 190.2 qt · 180.0 L | +14% 705/705-4 |
VALMET 6300-4 sources
Source
- Source: Traktorenlexikon, “Valmet 6300”
VALMET 705/705-4 sources
Source
- Source: Traktorenlexikon, “Valmet 705”