VALMET 6250 HiTech vs ZETOR 95

12 material differences

Tractor one

2000–2006

No measured PTO figure

Tractor two

2009–2012

No measured PTO figure

Which should you choose?

Read our verdict on the 6250 HiTech and the 95 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 5 fields identical or within 5%, which is not counted as material

VALMET 6250 HiTech and ZETOR 95, field by field
Field	6250 HiTech	95	Gap
Engine
Engine power, claimed claimed	—	88.8 hp	—
Engine declared	VALMET 420 DSRE or 44 DT	Zetor Z-1005 (Tier-III)	differs
Displacement declared	4.40 L	4.16 L	+6% 6250 HiTech
Maximum torque declared	—	288 lb·ft · 391 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9 mph · 40 km/h	differs
Clutch declared	Electrically operated dry Fichtel & Sachs single-plate clutch	Pedal operated, dry Zetor single disc clutch	differs
Hydraulics & hitch
Pump flow declared	19.4 gpm · 73.5 L/min	15.5 gpm · 58.5 L/min	+26% 6250 HiTech
Pressure declared	2,901 psi · 200 bar	3,046 psi · 210 bar	—
Three-point lift at ends declared	12,588 lb · 5,710 kg	12,897 lb · 5,850 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,698 lb · 4,399 kg	10,274 lb · 4,660 kg	+6% 95
Maximum permissible mass declared	19,842 lb · 9,000 kg	17,637 lb · 8,000 kg	+13% 6250 HiTech
Wheelbase declared	91.6 in · 2,326 mm	91.7 in · 2,328 mm	—
Length declared	176.2 in · 4,475 mm	160.1 in · 4,067 mm	+10% 6250 HiTech
Width declared	85.8 in · 2,179 mm	74.4 in · 1,890 mm	+15% 6250 HiTech
Height declared	109.1 in · 2,771 mm	107.3 in · 2,725 mm	—
Ground clearance declared	17.1 in · 434 mm	20.0 in · 508 mm	+17% 95
Turning radius, braked declared	15.3 ft · 4.65 m	17.5 ft · 5.35 m	+15% 95
Fuel tank declared	174.4 qt · 165.0 L	190.2 qt · 180.0 L	+9% 95

Source

Source