VALMET 6250 HiTech vs ZETOR 8641 (2002-2007)

9 material differences · fewer than 12

Tractor one

2000–2006

No measured PTO figure

Tractor two

2002–2007

No measured PTO figure

Which should you choose?

Read our verdict on the 6250 HiTech and the 8641 (2002-2007) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 7 fields identical or within 5%, which is not counted as material

VALMET 6250 HiTech and ZETOR 8641 (2002-2007), field by field
Field	6250 HiTech	8641 (2002-2007)	Gap
Engine
Engine power, claimed claimed	—	78.9 hp	—
Engine declared	VALMET 420 DSRE or 44 DT	ZETOR Z-1203	differs
Displacement declared	4.40 L	4.16 L	+6% 6250 HiTech
Maximum torque declared	—	251 lb·ft · 340 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9 mph · 40 km/h	differs
Clutch declared	Electrically operated dry Fichtel & Sachs single-plate clutch	—	—
Hydraulics & hitch
Pump flow declared	19.4 gpm · 73.5 L/min	15.1 gpm · 57.0 L/min	+29% 6250 HiTech
Pressure declared	2,901 psi · 200 bar	3,046 psi · 210 bar	—
Three-point lift at ends declared	12,588 lb · 5,710 kg	12,456 lb · 5,650 kg	—
Rear PTO speeds declared	540/1000 rpm	540/750/1000 rpm	differs
Weight & dimensions
Unladen weight declared	9,698 lb · 4,399 kg	9,381 lb · 4,255 kg	—
Maximum permissible mass declared	19,842 lb · 9,000 kg	14,771 lb · 6,700 kg	+34% 6250 HiTech
Wheelbase declared	91.6 in · 2,326 mm	94.4 in · 2,397 mm	—
Length declared	176.2 in · 4,475 mm	167.1 in · 4,245 mm	+5% 6250 HiTech
Width declared	85.8 in · 2,179 mm	86.2 in · 2,190 mm	—
Height declared	109.1 in · 2,771 mm	109.4 in · 2,780 mm	—
Ground clearance declared	17.1 in · 434 mm	14.3 in · 362 mm	+20% 6250 HiTech
Turning radius, braked declared	15.3 ft · 4.65 m	15.9 ft · 4.85 m	—
Fuel tank declared	174.4 qt · 165.0 L	190.2 qt · 180.0 L	+9% 8641 (2002-2007)

Source

Source