9 material differences · fewer than 12
Tractor oneVALMET 505/505-41983–1989No measured PTO figureTractor twoWHITE 2-621980–1981No measured PTO figure
Which should you choose?
Read our verdict on the 505/505-4 and the 2-62 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 505/505-4 | 2-62 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 64.1 hp | 64.1 hp | — |
| Engine declared | VALMET TD 33 DS 5 | ISUZU-Motors 4 BB-1 | differs |
| Displacement declared | 3.30 L | 3.60 L | +9% 2-62 |
| Maximum torque declared | — | 171 lb·ft · 232 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Pedal-operated dry LuK single-plate clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Pump flow declared | 13.9 gpm · 52.7 L/min | — | — |
| Pressure declared | 2,901 psi · 200 bar | — | — |
| Three-point lift, at the coupling points declared | 8,699 lb · 3,946 kg | 3,730 lb · 1,692 kg | +133% 505/505-4 |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 7,760 lb · 3,520 kg | 5,421 lb · 2,459 kg | +43% 505/505-4 |
| Wheelbase declared | 93.2 in · 2,368 mm | 84.6 in · 2,149 mm | +10% 505/505-4 |
| Length declared | 172.8 in · 4,390 mm | 142.1 in · 3,609 mm | +22% 505/505-4 |
| Width declared | 77.2 in · 1,960 mm | 76.4 in · 1,941 mm | — |
| Ground clearance declared | 18.3 in · 465 mm | 15.4 in · 391 mm | +19% 505/505-4 |
| Turning radius, braked declared | — | 10.3 ft · 3.15 m | — |
| Fuel tank declared | 190.2 qt · 180.0 L | 63.4 qt · 60.0 L | +200% 505/505-4 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
VALMET 505/505-4 sources
- Source: Traktorenlexikon, “Valmet 505”
WHITE 2-62 sources
- Source: Traktorenlexikon, “White 2-62”