11 material differences · fewer than 12

Tractor oneVALMET 365 (365-4)1994–1997No measured PTO figureTractor twoZETOR Proxima 6421/64412004–2007No measured PTO figure

Which should you choose?

Read our verdict on the 365 (365-4) and the Proxima 6421/6441 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

11 material differences · 4 fields identical or within 5%, which is not counted as material

VALMET 365 (365-4) and ZETOR Proxima 6421/6441, field by field
Field365 (365-4)Proxima 6421/6441Gap
Engine
Engine power, claimed claimed60.2 hp60.2 hp—
Engine declaredVALMET 320 DZetor Z-7204 or Z-7205 (Tier-II or III)differs
Displacement declared3.30 L4.16 L+26% Proxima 6421/6441
Maximum torque declared162 lb·ft · 220 N·m186 lb·ft · 252 N·m+15% Proxima 6421/6441
Transmission
Top speed declared18.6–24.9 mph · 30–40 km/h18.6–24.9 mph · 30–40 km/h—
Clutch declaredDry FICHTEL & SACHS double clutch——
Hydraulics & hitch
Hydraulic centre declaredOpen centre——
Pump flow declared14.5 gpm · 55.0 L/min12.2 gpm · 46.3 L/min+19% 365 (365-4)
Pressure declared2,901 psi · 200 bar3,046 psi · 210 bar—
Rear PTO speeds declared540E/540 rpm540/1000 rpmdiffers
Weight & dimensions
Unladen weight declared6,217 lb · 2,820 kg6,900 lb · 3,130 kg+11% Proxima 6421/6441
Maximum permissible mass declared—11,905 lb · 5,400 kg—
Wheelbase declared83.1 in · 2,112 mm91.4 in · 2,321 mm+10% Proxima 6421/6441
Length declared146.1 in · 3,710 mm189.1 in · 4,803 mm+29% Proxima 6421/6441
Width declared79.9 in · 2,030 mm78.3–88.6 in · 1,990–2,250 mmdiffers
Ground clearance declared15.9 in · 405 mm20.5 in · 520 mm+28% Proxima 6421/6441
Turning radius, braked declared11.5 ft · 3.50 m11.8 ft · 3.60 m—
Fuel tank declared77.1 qt · 73.0 L126.8 qt · 120.0 L+64% Proxima 6421/6441

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

VALMET 365 (365-4) sources

Source
  • Source: Traktorenlexikon, “Valmet 365”
  • Source: Traktorenlexikon, “Valmet 255”

ZETOR Proxima 6421/6441 sources

Source
  • Source: Traktorenlexikon, “Zetor Proxima 6421/6441”