VALMET 355 (355/4) vs ZETOR 4320/4340

10 material differences · fewer than 12

Tractor one

1990–1994

No measured PTO figure

Tractor two

1993–1997

No measured PTO figure

Which should you choose?

Read our verdict on the 355 (355/4) and the 4320/4340 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 7 fields identical or within 5%, which is not counted as material

VALMET 355 (355/4) and ZETOR 4320/4340, field by field
Field	355 (355/4)	4320/4340	Gap
Engine
Engine power, claimed claimed	60.2 hp	60.2 hp	—
Engine declared	VALMET TD-33 D 3 or 320 D	ZBROJORKA Z-6201	differs
Displacement declared	3.30 L	3.46 L	—
Maximum torque declared	146 lb·ft · 198 N·m	148 lb·ft · 201 N·m	—
Transmission
Top speed declared	15.5 mph · 25 km/h	15.5–18.6 mph · 25–30 km/h	differs
Clutch declared	—	Dry Zbrojovka double clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	8.2 gpm · 31.0 L/min	8.4 gpm · 31.8 L/min	—
Pressure declared	4,206 psi · 290 bar	1,160 psi · 80 bar	+263% 355 (355/4)
Three-point lift at ends declared	5,688 lb · 2,580 kg	5,849 lb · 2,653 kg	—
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	5,886 lb · 2,670 kg	6,349 lb · 2,880 kg	+8% 4320/4340
Maximum permissible mass declared	—	12,346 lb · 5,600 kg	—
Wheelbase declared	83.1 in · 2,112 mm	88.9 in · 2,257 mm	+7% 4320/4340
Length declared	146.1 in · 3,710 mm	142.9 in · 3,630 mm	—
Width declared	77.4 in · 1,965 mm	73.0 in · 1,854 mm	+6% 355 (355/4)
Height declared	96.9 in · 2,460 mm	103.6 in · 2,632 mm	+7% 4320/4340
Ground clearance declared	15.9 in · 405 mm	19.4 in · 492 mm	+21% 4320/4340
Turning radius, braked declared	10.2 ft · 3.10 m	11.8 ft · 3.60 m	+16% 4320/4340
Fuel tank declared	77.1 qt · 73.0 L	74.0 qt · 70.0 L	—

Source

Source