11 material differences · fewer than 12
Tractor oneVALMET 1103/1103-41979–1980No measured PTO figureTractor twoWHITE 2-1051974–1982No measured PTO figure
Which should you choose?
Read our verdict on the 1103/1103-4 and the 2-105 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 1103/1103-4 | 2-105 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 105.5 hp | 105 hp | — |
| Engine declared | VALMET 411 CS | Perkins AT 6.354 | differs |
| Displacement declared | 4.40 L | 5.80 L | +32% 2-105 |
| Maximum torque declared | 273 lb·ft · 370 N·m | — | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5 mph · 25 km/h | +20% 1103/1103-4 |
| Clutch declared | Dry Fichtel & Sachs double clutch | pedal-operated dry single-disc clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 9.2 gpm · 35.0 L/min | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 8,708 lb · 3,950 kg | 11,810 lb · 5,357 kg | +36% 2-105 |
| Wheelbase declared | 91.3 in · 2,320 mm | 103.0 in · 2,616 mm | +13% 2-105 |
| Length declared | 154.7 in · 3,930 mm | 178.3 in · 4,528 mm | +15% 2-105 |
| Width declared | 78.0 in · 1,980 mm | 80.6 in · 2,048 mm | — |
| Ground clearance declared | 20.5 in · 520 mm | 25.4 in · 645 mm | +24% 2-105 |
| Turning radius, braked declared | 12.1 ft · 3.70 m | 12.9 ft · 3.93 m | +6% 2-105 |
| Fuel tank declared | 102.5 qt · 97.0 L | 128.9 qt · 122.0 L | +26% 2-105 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
VALMET 1103/1103-4 sources
- Source: Traktorenlexikon, “Valmet 1103”
- Source: Traktorenlexikon, “Valmet 802”
WHITE 2-105 sources
- Source: Traktorenlexikon, “White 2-105”
- Source: Traktorenlexikon, “Massey Ferguson MF 1130”