UTB 302 Dtce-IF or WARCHALOWSKI-MC CORMICK WT-32 B?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 302 Dtce-IF has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the WT-32 B has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The WARCHALOWSKI-MC CORMICK WT-32 B suits loader and hydraulic implement work better on this data: 50% (600 kg / 1,323 lb) more three-point lift.
  • The UTB 302 Dtce-IF suits heavy draft work (ploughing, cultivating) better on this data: 79% (1,225 kg / 2,701 lb) heavier and four-wheel drive.
  • The WARCHALOWSKI-MC CORMICK WT-32 B suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for UTB 302 Dtce-IF and WARCHALOWSKI-MC CORMICK WT-32 B, with the call on each
Question302 Dtce-IFWT-32 BCall
Which puts more power through the PTO shaft?22.1 kW (29.6 hp)Traktorenlexikon, “UTB U 302 DTCE IF”22.1 kW (29.6 hp)Traktorenlexikon, “Warchalowski WT 32B”Not comparableNot comparable on power at the PTO shaft: the 302 Dtce-IF has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the WT-32 B has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 302 Dtce-IF and the WT-32 B.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 302 Dtce-IF and the WT-32 B.
Which pumps more oil for implements?25.0 L/min (6.6 gpm)Traktorenlexikon, “UTB U 302 DTCE IF”No figureNo call on hydraulic flow: no figure on record for the WT-32 B.
Which lifts more on the three-point hitch?1,200 kg (2,646 lb)Traktorenlexikon, “UTB U 302 DTCE IF”1,800 kg (3,968 lb)Traktorenlexikon, “Warchalowski WT 32B”AheadThe WARCHALOWSKI-MC CORMICK WT-32 B has 50% more lift (600 kg / 1,323 lb) than the UTB 302 Dtce-IF (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?2,775 kg (6,118 lb)Traktorenlexikon, “UTB U 302 DTCE IF”1,550 kg (3,417 lb)Traktorenlexikon, “Warchalowski WT 32B”Ahead (a fact, not an advantage)The UTB 302 Dtce-IF is 79% heavier (1,225 kg / 2,701 lb) than the WARCHALOWSKI-MC CORMICK WT-32 B (both unladen weight, as stated by the source).
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the 302 Dtce-IF and the WT-32 B.
Which has the wider choice of gears?6Traktorenlexikon, “UTB U 302 DTCE IF”8Traktorenlexikon, “Warchalowski WT 32B”AheadThe WARCHALOWSKI-MC CORMICK WT-32 B has 33% more forward gears (2 gears) than the UTB 302 Dtce-IF (both forward gears, as stated by the source).
Which offers a creeper range?YesTraktorenlexikon, “Warchalowski WT 32B”No figureNo call on a creeper range: not stated for the 302 Dtce-IF.
Which is faster on the road?25 km/h (15.5 mph)Traktorenlexikon, “UTB U 302 DTCE IF”30 km/h (18.6 mph)Traktorenlexikon, “Warchalowski WT 32B”AheadThe WARCHALOWSKI-MC CORMICK WT-32 B has 20% more top speed (5.0 km/h / 3.1 mph) than the UTB 302 Dtce-IF (both top speed forward, as stated by the source).
Which offers more PTO speeds?540 rpmTraktorenlexikon, “UTB U 302 DTCE IF”540 rpmTraktorenlexikon, “Warchalowski WT 32B”EvenEven on PTO speeds: the same speeds (540 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Warchalowski WT 32B”No figureNo call on PTO independence: not stated for the 302 Dtce-IF.
Which drives on both axles?4WDTraktorenlexikon, “UTB U 302 DTCE IF”2WDTraktorenlexikon, “Warchalowski WT 32B”AheadThe UTB 302 Dtce-IF is available with four-wheel drive; the WARCHALOWSKI-MC CORMICK WT-32 B is two-wheel drive (as stated by the sources).
Which is newer, and what about parts?1980–19911968–1971Ahead (a fact, not an advantage)The UTB 302 Dtce-IF is newer: production began 12 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The WARCHALOWSKI-MC CORMICK WT-32 B has 50% more lift (600 kg / 1,323 lb) than the UTB 302 Dtce-IF (both lift at the hitch ends, as stated by the source).
  • The UTB 302 Dtce-IF is 79% heavier (1,225 kg / 2,701 lb) than the WARCHALOWSKI-MC CORMICK WT-32 B (both unladen weight, as stated by the source).
  • The WARCHALOWSKI-MC CORMICK WT-32 B has 33% more forward gears (2 gears) than the UTB 302 Dtce-IF (both forward gears, as stated by the source).
  • The WARCHALOWSKI-MC CORMICK WT-32 B has 20% more top speed (5.0 km/h / 3.1 mph) than the UTB 302 Dtce-IF (both top speed forward, as stated by the source).
  • The UTB 302 Dtce-IF is available with four-wheel drive; the WARCHALOWSKI-MC CORMICK WT-32 B is two-wheel drive (as stated by the sources).
  • The UTB 302 Dtce-IF is newer: production began 12 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on PTO speeds: the same speeds (540 rpm).
  • Not comparable on power at the PTO shaft: the 302 Dtce-IF has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the WT-32 B has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources