URSUS 932/934 vs VALMET 655/655-4
10 material differences · fewer than 12
Which should you choose?
We will not advise between these two machines, because they were not built in overlapping years (1990–2003; 1988–1989). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
10 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 932/934 | 655/655-4 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 78.9 hp | 78.9 hp | — |
| Engine declared | Z.T.S.-MARTIN Z-8401.12 | VALMET D 44 D-7 | differs |
| Displacement declared | 4.56 L | 4.40 L | — |
| Maximum torque declared | 187 lb·ft · 254 N·m | 221 lb·ft · 300 N·m | +18% 655/655-4 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Pedal-operated dry single-disc clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 11.9 gpm · 45.2 L/min | — | — |
| Pressure declared | 2,828 psi · 195 bar | — | — |
| Three-point lift at ends declared | 9,054 lb · 4,107 kg | 9,921 lb · 4,500 kg | +10% 655/655-4 |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 9,348 lb · 4,240 kg | 8,289 lb · 3,760 kg | +13% 932/934 |
| Maximum permissible mass declared | 16,314 lb · 7,400 kg | — | — |
| Wheelbase declared | 94.0 in · 2,387 mm | 93.9 in · 2,385 mm | — |
| Length declared | 162.6 in · 4,130 mm | 177.8 in · 4,515 mm | +9% 655/655-4 |
| Width declared | 77.4 in · 1,966 mm | 83.9 in · 2,130 mm | +8% 655/655-4 |
| Height declared | 115.7 in · 2,940 mm | 105.1 in · 2,670 mm | +10% 932/934 |
| Ground clearance declared | 13.6 in · 345 mm | 18.7 in · 475 mm | +38% 655/655-4 |
| Turning radius, braked declared | 11.7 ft · 3.58 m | — | — |
| Fuel tank declared | 95.1 qt · 90.0 L | 190.2 qt · 180.0 L | +100% 655/655-4 |
URSUS 932/934 sources
Source
- Source: Traktorenlexikon, “Ursus 932/934”
VALMET 655/655-4 sources
Source
- Source: Traktorenlexikon, “Valmet 655”