9 material differences · fewer than 12
Tractor oneSteyr 40, 40h, 40a1967–1977No measured PTO figureTractor twoVolvo T-351952–1959No measured PTO figure
Which should you choose?
Read our verdict on the 40, 40h, 40a and the T-35 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 40, 40h, 40a | T-35 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 38 hp | 42.0 hp | +12% T-35 |
| Engine declared | Steyr WD-307.40 | VOLVO 1053 | differs |
| Displacement declared | 2.26 L | 3.36 L | +49% T-35 |
| Maximum torque declared | 113 lb·ft · 153 N·m | 152 lb·ft · 206 N·m | +35% T-35 |
| Transmission | |||
| Top speed declared | 17.4 mph · 28 km/h | 18.6 mph · 30 km/h | +7% T-35 |
| Clutch declared | Pedal operated dry Steyr single plate clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 6.1 gpm · 23.0 L/min | 6.3 gpm · 23.8 L/min | — |
| Pressure declared | — | 1,276 psi · 88 bar | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 4,123 lb · 1,870 kg | 5,401 lb · 2,450 kg | +31% T-35 |
| Maximum permissible mass declared | 6,283 lb · 2,850 kg | — | — |
| Wheelbase declared | 76.8 in · 1,950 mm | 77.2 in · 1,960 mm | — |
| Length declared | 131.1 in · 3,330 mm | 124.0 in · 3,150 mm | +6% 40, 40h, 40a |
| Width declared | 63.5–70.9 in · 1,614–1,800 mm | 66.5 in · 1,690 mm | differs |
| Ground clearance declared | 15.0 in · 380 mm | 20.7 in · 525 mm | +38% T-35 |
| Turning radius, braked declared | 10.4 ft · 3.16 m | 11.2 ft · 3.40 m | +8% T-35 |
| Fuel tank declared | 65.5 qt · 62.0 L | 68.7 qt · 65.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Steyr 40, 40h, 40a sources
- Source: Traktorenlexikon, “Steyr Plus 40”
Volvo T-35 sources
- Source: Traktorenlexikon, “Volvo T 35”