Steyr 8080 (a) or UTB U-703 DT?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 8080 (a) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the U-703 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The UTB U-703 DT suits loader and hydraulic implement work better on this data: 32% (836 kg / 1,843 lb) more three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Steyr 8080 (a) and UTB U-703 DT, with the call on each
Question8080 (a)U-703 DTCall
Which puts more power through the PTO shaft?51.5 kW (69.1 hp)Traktorenlexikon, “Steyr 8080”51.5 kW (69.1 hp)Traktorenlexikon, “UTB U 703 DT”Not comparableNot comparable on power at the PTO shaft: the 8080 (a) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the U-703 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 8080 (a) and the U-703 DT.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 8080 (a) and the U-703 DT.
Which pumps more oil for implements?42.5 L/min (11.2 gpm)Traktorenlexikon, “UTB U 703 DT”No figureNo call on hydraulic flow: no figure on record for the 8080 (a).
Which lifts more on the three-point hitch?2,600 kg (5,732 lb)Traktorenlexikon, “Steyr 8080”3,436 kg (7,575 lb)Traktorenlexikon, “UTB U 703 DT”AheadThe UTB U-703 DT has 32% more lift (836 kg / 1,843 lb) than the Steyr 8080 (a) (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?2,808 kg (6,191 lb)Traktorenlexikon, “Steyr 8080”3,265 kg (7,198 lb)Traktorenlexikon, “UTB U 703 DT”Ahead (a fact, not an advantage)The UTB U-703 DT is 16% heavier (457 kg / 1,008 lb) than the Steyr 8080 (a) (both unladen weight, as stated by the source).
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the 8080 (a) and the U-703 DT.
Which has the wider choice of gears?16 to 32Traktorenlexikon, “Steyr 8080”16Traktorenlexikon, “UTB U 703 DT”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?YesTraktorenlexikon, “UTB U 703 DT”No figureNo call on a creeper range: not stated for the 8080 (a).
Which is faster on the road?25 km/h (15.5 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Steyr 8080”30 km/h (18.6 mph)Traktorenlexikon, “UTB U 703 DT”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Steyr 8080”540/1000 rpmTraktorenlexikon, “UTB U 703 DT”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Steyr 8080”No figureNo call on PTO independence: not stated for the U-703 DT.
Which drives on both axles?2WD / 4WDTraktorenlexikon, “Steyr 8080”4WDTraktorenlexikon, “UTB U 703 DT”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1979–19921988–2004Ahead (a fact, not an advantage)The UTB U-703 DT is newer: production began 9 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The UTB U-703 DT has 32% more lift (836 kg / 1,843 lb) than the Steyr 8080 (a) (both lift at the hitch ends, as stated by the source).
  • The UTB U-703 DT is 16% heavier (457 kg / 1,008 lb) than the Steyr 8080 (a) (both unladen weight, as stated by the source).
  • The UTB U-703 DT is newer: production began 9 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the 8080 (a) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the U-703 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources