Steyr 8080 (a) vs UTB U-703 DT

8 material differences · fewer than 12

Tractor one

1979–1992

No measured PTO figure

Tractor two

1988–2004

No measured PTO figure

Which should you choose?

Read our verdict on the 8080 (a) and the U-703 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 6 fields identical or within 5%, which is not counted as material

Steyr 8080 (a) and UTB U-703 DT, field by field
Field	8080 (a)	U-703 DT	Gap
Engine
Engine power, claimed claimed	69.1 hp	69.1 hp	—
Engine declared	Steyr WD-411.86 or WD-411.85	UTB D-2404.000	differs
Displacement declared	3.46 L	3.76 L	+9% U-703 DT
Maximum torque declared	189 lb·ft · 256 N·m	175 lb·ft · 237 N·m	+8% 8080 (a)
Transmission
Top speed declared	15.5–24.9 mph · 25–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	—	Dry U.T.B. double clutch	—
Hydraulics & hitch
Pump flow declared	—	11.2 gpm · 42.5 L/min	—
Pressure declared	—	2,031 psi · 140 bar	—
Three-point lift at ends declared	5,732 lb · 2,600 kg	7,575 lb · 3,436 kg	+32% U-703 DT
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,191 lb · 2,808 kg	7,198 lb · 3,265 kg	+16% U-703 DT
Wheelbase declared	86.4 in · 2,195 mm	87.2 in · 2,215 mm	—
Length declared	148.4 in · 3,770 mm	148.4 in · 3,770 mm	—
Width declared	74.1 in · 1,883 mm	76.3 in · 1,939 mm	—
Height declared	101.2 in · 2,570 mm	98.4 in · 2,500 mm	—
Ground clearance declared	15.7 in · 400 mm	9.7 in · 246 mm	+63% 8080 (a)
Turning radius, braked declared	11.5 ft · 3.50 m	—	—
Fuel tank declared	101.4 qt · 96.0 L	65.5 qt · 62.0 L	+55% 8080 (a)

Source

Source