Steyr 1400 a vs VALMET 1502

11 material differences · fewer than 12

Tractor one

1974–1979

No measured PTO figure

Tractor two

1975–1980

No measured PTO figure

Which should you choose?

Read our verdict on the 1400 a and the 1502 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

Steyr 1400 a and VALMET 1502, field by field
Field	1400 a	1502	Gap
Engine
Engine power, claimed claimed	138 hp	134 hp	—
Engine declared	Steyr WD-612.85	VALMET 611 CS	differs
Displacement declared	6.59 L	6.60 L	—
Maximum torque declared	398 lb·ft · 540 N·m	406 lb·ft · 550 N·m	—
Transmission
Top speed declared	19.9 mph · 32 km/h	18.6 mph · 30 km/h	+7% 1400 a
Clutch declared	dry Fichtel & Sachs single disc clutch	Dry Fichtel & Sachs double clutch	differs
Hydraulics & hitch
Pump flow declared	10.8 gpm · 41.0 L/min	—	—
Pressure declared	2,489 psi · 172 bar	—	—
Three-point lift at ends declared	9,965 lb · 4,520 kg	7,871 lb · 3,570 kg	+27% 1400 a
Rear PTO speeds declared	1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	12,478 lb · 5,660 kg	16,469 lb · 7,470 kg	+32% 1502
Maximum permissible mass declared	17,637 lb · 8,000 kg	—	—
Wheelbase declared	106.3 in · 2,700 mm	101.3 in · 2,572 mm	—
Length declared	231.9 in · 5,890 mm	209.8 in · 5,330 mm	+11% 1400 a
Width declared	96.1 in · 2,440 mm	83.7 in · 2,125 mm	+15% 1400 a
Height declared	108.3 in · 2,750 mm	118.1 in · 3,000 mm	+9% 1502
Ground clearance declared	18.9 in · 480 mm	16.5 in · 420 mm	+14% 1400 a
Fuel tank declared	262.1 qt · 248.0 L	190.2 qt · 180.0 L	+38% 1400 a

Source

Source