9 material differences · fewer than 12
Tractor oneSOMECA SOM-40 Super1963–1964No measured PTO figureTractor twoZETOR 40111962–1967No measured PTO figure
Which should you choose?
Read our verdict on the SOM-40 Super and the 4011 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | SOM-40 Super | 4011 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 44.4 hp | 44.4 hp | — |
| Engine declared | O.M.-FIAT CO 2D-45 | ZETOR Z-4001 | differs |
| Displacement declared | 4.40 L | 3.12 L | +41% SOM-40 Super |
| Transmission | |||
| Top speed declared | 13.7 mph · 22 km/h | 15.5 mph · 25 km/h | +14% 4011 |
| Clutch declared | Pedal operated dry FERODO double clutch | Pedal-operated dry two-stage double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 4.0 gpm · 15.2 L/min | 6.1 gpm · 23.0 L/min | +51% 4011 |
| Pressure declared | — | 1,707 psi · 118 bar | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,567 lb · 2,525 kg | 4,332 lb · 1,965 kg | +28% SOM-40 Super |
| Wheelbase declared | 80.0 in · 2,032 mm | 83.7 in · 2,125 mm | — |
| Length declared | 132.5 in · 3,365 mm | 128.0 in · 3,250 mm | — |
| Width declared | 68.7–95.1 in · 1,745–2,415 mm | 70.5 in · 1,790 mm | differs |
| Ground clearance declared | 14.3 in · 364 mm | 17.2 in · 436 mm | +20% 4011 |
| Turning radius, braked declared | 10.8 ft · 3.30 m | 10.7 ft · 3.25 m | — |
| Fuel tank declared | 59.2 qt · 56.0 L | 84.5 qt · 80.0 L | +43% 4011 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
SOMECA SOM-40 Super sources
- Source: Traktorenlexikon, “Someca SOM 40 Super”
ZETOR 4011 sources
- Source: Traktorenlexikon, “Zetor 4011”
- Source: Traktorenlexikon, “Zetor 4511”