8 material differences · fewer than 12
Tractor oneSOMECA SOM-3121964–1965No measured PTO figureTractor twoZickler 37541966–1967No measured PTO figure
Which should you choose?
Read our verdict on the SOM-312 and the 3754 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | SOM-312 | 3754 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 29.6 hp | 30 hp | — |
| Engine declared | O.M.-FIAT 605 D 017 | — | — |
| Displacement declared | 1.90 L | — | — |
| Maximum torque declared | 74 lb·ft · 101 N·m | — | — |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 11.7 mph · 18.79 km/h | +6% SOM-312 |
| Clutch declared | Pedal-operated two-stage dry double clutch | Single-plate dry clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 4.4 gpm · 16.5 L/min | — | — |
| Pressure declared | 2,843 psi · 196 bar | — | — |
| Rear PTO speeds declared | 540 rpm | 588 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 3,770 lb · 1,710 kg | 2,315 lb · 1,050 kg | +63% SOM-312 |
| Maximum permissible mass declared | — | 3,726 lb · 1,690 kg | — |
| Wheelbase declared | 69.9 in · 1,776 mm | 54.3 in · 1,380 mm | +29% SOM-312 |
| Length declared | 113.4 in · 2,880 mm | — | — |
| Width declared | 62.2–86.6 in · 1,580–2,200 mm | 36.2 in · 920 mm | differs |
| Ground clearance declared | 15.7 in · 400 mm | 9.1 in · 230 mm | +74% SOM-312 |
| Turning radius, braked declared | 10.8 ft · 3.30 m | 6.4 ft · 1.95 m | +69% SOM-312 |
| Fuel tank declared | 41.2 qt · 39.0 L | — | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
SOMECA SOM-312 sources
- Source: Traktorenlexikon, “Someca SOM 312”
Zickler 3754 sources
- Source: Traktorenlexikon, “Zickler 3754”