10 material differences · fewer than 12
Tractor oneSOMECA 715/5 L (DT)1967–1968No measured PTO figureTractor twoWHITE 2-651982–1988No measured PTO figure
Which should you choose?
Read our verdict on the 715/5 L (DT) and the 2-65 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 715/5 L (DT) | 2-65 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 62.1 hp | 62.1 hp | — |
| Engine declared | O.M.-FIAT CO 3 D/130-70-2 | ISUZU-Motors 4 BD-1 | differs |
| Displacement declared | — | 3.86 L | — |
| Maximum torque declared | 203 lb·ft · 275 N·m | — | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | Pedal-operated dry two-stage FERODO double clutch | Pedal-operated dry DAIKIN single-disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Pump flow declared | 7.2 gpm · 27.3 L/min | — | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,393 lb · 2,900 kg | 5,313 lb · 2,410 kg | +20% 715/5 L (DT) |
| Wheelbase declared | 86.6 in · 2,200 mm | 84.6 in · 2,149 mm | — |
| Length declared | 149.6 in · 3,800 mm | 142.1 in · 3,609 mm | +5% 715/5 L (DT) |
| Width declared | 70.9–94.5 in · 1,800–2,400 mm | 63.6 in · 1,615 mm | differs |
| Height, over the exhaust declared | 90.0 in · 2,285 mm | 97.0 in · 2,464 mm | +8% 2-65 |
| Ground clearance declared | 18.3 in · 465 mm | 19.8 in · 503 mm | +8% 2-65 |
| Turning radius, braked declared | 12.5 ft · 3.82 m | 9.8 ft · 3.00 m | +27% 715/5 L (DT) |
| Fuel tank declared | 88.8 qt · 84.0 L | 63.4 qt · 60.0 L | +40% 715/5 L (DT) |
SOMECA 715/5 L (DT) sources
Source
- Source: Traktorenlexikon, “Someca 715/5 L”
WHITE 2-65 sources
Source
- Source: Traktorenlexikon, “White 2-65”