SOMECA 474 DT/V or ZETOR 5213/5243 V/P?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 474 DT/V has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 5213/5243 V/P has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The SOMECA 474 DT/V suits loader and hydraulic implement work better on this data: 12% (3.8 L/min / 1.0 gpm) more hydraulic flow.
  • The ZETOR 5213/5243 V/P suits road haulage better on this data: 25% (5.0 km/h / 3.1 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for SOMECA 474 DT/V and ZETOR 5213/5243 V/P, with the call on each
Question474 DT/V5213/5243 V/PCall
Which puts more power through the PTO shaft?33.8 kW (45.3 hp)Traktorenlexikon, “Someca 474 V”33.1 kW (44.4 hp)Traktorenlexikon, “Zetor 5213/5243 V/P”Not comparableNot comparable on power at the PTO shaft: the 474 DT/V has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 5213/5243 V/P has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 474 DT/V and the 5213/5243 V/P.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 474 DT/V and the 5213/5243 V/P.
Which pumps more oil for implements?36.0 L/min (9.5 gpm)Traktorenlexikon, “Someca 474 V”32.2 L/min (8.5 gpm)Traktorenlexikon, “Zetor 5213/5243 V/P”AheadThe SOMECA 474 DT/V has 12% more hydraulic flow (3.8 L/min / 1.0 gpm) than the ZETOR 5213/5243 V/P (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?No figureNo call on three-point lift: no figure on record for the 474 DT/V and the 5213/5243 V/P.
Which is heavier, for traction?1,655 kg (3,649 lb)Traktorenlexikon, “Someca 474 V”2,230 kg (4,916 lb)Traktorenlexikon, “Zetor 5213/5243 V/P”Ahead (a fact, not an advantage)The ZETOR 5213/5243 V/P is 35% heavier (575 kg / 1,268 lb) than the SOMECA 474 DT/V (both unladen weight, as stated by the source).
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the 474 DT/V and the 5213/5243 V/P.
Which has the wider choice of gears?9Traktorenlexikon, “Someca 474 V”10Traktorenlexikon, “Zetor 5213/5243 V/P”EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 474 DT/V and the 5213/5243 V/P.
Which is faster on the road?20 km/h (12.4 mph)Traktorenlexikon, “Someca 474 V”25 km/h (15.5 mph)Traktorenlexikon, “Zetor 5213/5243 V/P”AheadThe ZETOR 5213/5243 V/P has 25% more top speed (5.0 km/h / 3.1 mph) than the SOMECA 474 DT/V (both top speed forward, as stated by the source).
Which offers more PTO speeds?540 rpmTraktorenlexikon, “Someca 474 V”540 rpmTraktorenlexikon, “Zetor 5213/5243 V/P”EvenEven on PTO speeds: the same speeds (540 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Someca 474 V”No figureNo call on PTO independence: not stated for the 5213/5243 V/P.
Which drives on both axles?4WDTraktorenlexikon, “Someca 474 V”2WD / 4WDTraktorenlexikon, “Zetor 5213/5243 V/P”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1978–19851990–2004Ahead (a fact, not an advantage)The ZETOR 5213/5243 V/P is newer: production began 12 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The SOMECA 474 DT/V has 12% more hydraulic flow (3.8 L/min / 1.0 gpm) than the ZETOR 5213/5243 V/P (both pump flow, as stated by the source).
  • The ZETOR 5213/5243 V/P is 35% heavier (575 kg / 1,268 lb) than the SOMECA 474 DT/V (both unladen weight, as stated by the source).
  • The ZETOR 5213/5243 V/P has 25% more top speed (5.0 km/h / 3.1 mph) than the SOMECA 474 DT/V (both top speed forward, as stated by the source).
  • The ZETOR 5213/5243 V/P is newer: production began 12 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
  • Even on PTO speeds: the same speeds (540 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the 474 DT/V has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 5213/5243 V/P has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources