8 material differences · fewer than 12
Tractor oneSOMECA 474 DT/V1978–1985No measured PTO figureTractor twoZETOR 5213/5243 V/P1990–2004No measured PTO figure
Which should you choose?
Read our verdict on the 474 DT/V and the 5213/5243 V/P → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 474 DT/V | 5213/5243 V/P | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 45.3 hp | 44.4 hp | — |
| Engine declared | FIAT-IVECO 8035.02 | ZBROJORKA Z-5201 | differs |
| Displacement declared | 2.59 L | 2.70 L | — |
| Maximum torque declared | — | 108 lb·ft · 146 N·m | — |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 15.5 mph · 25 km/h | +25% 5213/5243 V/P |
| Clutch declared | Pedal-operated dry double clutch with 225.0 mm disc diameter | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 9.5 gpm · 36.0 L/min | 8.5 gpm · 32.2 L/min | +12% 474 DT/V |
| Pressure declared | 2,901 psi · 200 bar | 3,046 psi · 210 bar | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 3,649 lb · 1,655 kg | 4,916 lb · 2,230 kg | +35% 5213/5243 V/P |
| Wheelbase declared | 73.6 in · 1,870 mm | 80.3 in · 2,040 mm | +9% 5213/5243 V/P |
| Length declared | 125.2 in · 3,180 mm | 124.4 in · 3,160 mm | — |
| Width declared | 44.9 in · 1,140 mm | 61.4 in · 1,560 mm | +37% 5213/5243 V/P |
| Ground clearance declared | 6.3 in · 160 mm | 14.1 in · 357 mm | +123% 5213/5243 V/P |
| Turning radius, braked declared | — | 10.3 ft · 3.15 m | — |
| Fuel tank declared | 44.4 qt · 42.0 L | 41.2 qt · 39.0 L | +8% 474 DT/V |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
SOMECA 474 DT/V sources
- Source: Traktorenlexikon, “Someca 474 V”
- Source: Traktorenlexikon, “Someca 440”
ZETOR 5213/5243 V/P sources
- Source: Traktorenlexikon, “Zetor 5213/5243 V/P”
- Source: Traktorenlexikon, “Zetor 5211”